Specifications

AR-F14/PN1 UNPACKING AND INSTALLATION 3-10
<4>Reattach the jam handling dial and close the front cover.
8) Paste the dust box label to the top cover.
<1> Paste the supplied dust box label to the location indicated in the
illustration.
9) Connect the connector to the stand/paper drawer and connect the
AC cord of the power supply unit to the main unit of the printer.
<1>Connect the connector of the relay harness of the finisher to the
stand/paper drawer and tighten the screws of the connector.10)
Paste the label.
(Paste it only if the scanner module is installed.)
<1>Paste the label to the position shown in the illustration.
Jam handling dial
Staple position label
Punch position label
[03]UNPACKINGANDINSTALLATION.fm 10 ページ ２００４年４月２７日 火曜日 午後７時１５分