Specifications

1
19 Printing from Windows Computers
Sharp AR-C360P EFI Printing Guide - 19
For information about these options and overrides, see
Appendix A.
For information on configuring installable options, see Chapter 1
of the User Software Installation Guide.
For more information about job management tools, see the
Job Management Guide.
If you choose Printer’s default, the job prints according to the
settings specified in Setup. For more information, see Appendix A.
Note:If paper loaded in the selected tray is a different size, orientation, or
media type than that of the job you are sending, the Fiery displays an
error message and the job will not print. You should then load the correct
paper in the selected tray or cancel the job.
Note:If you specify incompatible print settings, the Conflict dialog box
provides instructions to resolve the conflict.
9. From your application, click OK twice to send your print job.
Make sure the Fiery is selected as your current printer.
Note:Some options listed in the printer driver could also be set from an
application (for example, collation or Reverse Order). In these cases, use
the driver option to perform the function, rather than setting it from the
application. The application might not set up the file properly for printing
on the Fiery, resulting in unexpected printing errors and longer
processing time.
Note:If the Fiery Mail Port is installed and the Status messages from Fiery
option is selected in the E-Mail Port Configuration dialog box, you can
receive an e-mail notification if a printing error occurs to your job. For
more information on installing and configuring the Fiery Mail Port, see the
User Software Installation Guide.
To set default print options for Windows print
jobs using the Postscript printer driver
1. Windows 98/Me/NT 4.0/2000: Click Start, choose Settings, and
then choose Printers.
Windows XP
: Click Start and click Printers and Faxes.
Windows Server 2003: Choose Settings and then Printers and
Faxes.