Specifications

C
141 Troubleshooting
Sharp AR-C360P EFI Printing Guide - 141
You get poor printing
results.
• Check if your application requires one of the Fiery’s printer
description files.
Your application may require the Fiery PPD. If you print from Adobe
PageMaker, make sure the Fiery PPD is installed correctly. For information
about installing this file, see the User Software Installation Guide.
• Make sure the system has been calibrated.
For instructions, see Chapter 2 of the Color Guide.
The registration or color
of an image are not what
you expected.
• Ask the operator to print a Test Page with the printer.
The problem may be with the printer. If your Test Page shows that the
printer is working properly, correct the problem within your application. If
the Test Page is wrong, your printer may need to be adjusted.
Your printed file appears
too dark.
• Adjust the Brightness option.
You can use the Brightness option when printing from an application or
from Fiery Downloader to lighten your image whenever you print a
PostScript or Encapsulated PostScript (EPS) file.
Color file prints in black
and white.
• In the Color Matching dialog box, make sure that Color/Grayscale,
or ColorSync Color Matching or PostScript Color Matching is
selected (not Black and White).
• Make sure the Color Mode print option is set to an option other
than Grayscale.
Desktop Color
Separations (DCS) format
images print incorrectly.
• Make sure you selected the correct options to send separations in
the application’s Print dialog box.
• Make sure you have the file for every layer of separation that you
are printing.
• Set the Combine Separations option to On.
This combines the high-resolution files for an image and prints them. With
Combine Separations Off, the low-resolution master file will print.
QuickDraw fill patterns
print as solids.
• Use the Adobe PostScript Printer driver (or the Apple LaserWriter
8.3 or later printer driver).
If this happens Try this