Specifications

C
139 Troubleshooting
Sharp AR-C360P EFI Printing Guide - 139
General printing problems
If this happens Try this
You cannot connect to
the Fiery.
• Make sure the Sharp AR-C360P is not being calibrated from the
Control Panel.
If the Fiery is being calibrated from the Control Panel, you can select it in
the Chooser, but you cannot connect to it. This ensures that only one
person is calibrating the Fiery at any time and that print jobs do not use
unexpected calibration.
You cannot select or view
one of the queues.
• Request that your system administrator enable the queue in Setup.
You cannot connect to
the Fiery from a Windows
computer with Command
WorkStation or the
Fiery utilities.
• Make sure the connection is configured correctly.
For instructions, see Chapter 1 of the User Software Installation Guide.
Printing seems to take
too long.
• Print to a queue instead of to the Direct connection.
When you print to a queue, the job is stored on the Fiery until it can be
processed and printed; when you print to the Direct connection, the job
cannot be sent to the Fiery until the previous job is finished processing, so
you must wait longer to use your computer.