Specifications
Table Of Contents
- Contents
- About the Documentation
- Introduction
- Chapter 1: Printing from Windows Computers
- Chapter 2: Printing from Mac OS Computers
- Chapter 3: Printing from UNIX Workstations
- Chapter 4: Downloading Files and Fonts
- Chapter 5: Printing Variable Data Documents
- Chapter 6: Using EFI Hot Folders
- Chapter 7: Tracking and Monitoring Jobs
- Chapter 8: Using Fiery E- mail Service
- Appendix A: Print Options
- Appendix B: Font List
- Appendix C: Troubleshooting
- Index
8
111 Using Fiery E-mail Service
Sharp AR-C360P EFI Printing Guide - 111
Printing using the E-mail Port Monitor
Once you set up the E-mail Port Monitor, you can print using E-
mail Service in the same manner as any other printing method.
No additional steps are necessary.
Note:The E-mail Port Monitor is only supported on Windows computers.
Also, Direct connection is not supported when printing with E-mail
Port Monitor.
To print using the Fiery E-mail Port Monitor
1. Choose Print in your application.
2. Make sure the Fiery is selected as your printer and you have set
up the E-mail Port Monitor for the Fiery.
3. Click Properties.
4. Click the Fiery Printing tab.
5. Set the print options and click OK.
To set options using the printer driver, see “Setting options and
printing from Windows computers” on page 1-14.
6. Click OK again to send your job to the Fiery.
Note:If the attachment exceeds the file size limitation set in your
application, the attachment may be broken into several messages.