Unit installation

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 23
Main
code
Sub
code
Title
Sorter staple unit oscillation motor
trouble (Sorter side detection)
F1 87 Phenomena Display Lamp
Message
Detail The stapler shift home
position sensor signal is not
recognized within 1sec from
start of initializing. / The
stapler shift home position
sensor signal polarity
change is not recognized
within 1sec from start of
stapler shift operation. / The
rotation sensor output
signal is not recognized
within 0.25sec from output
of the stapler shift motor ON
signal.
Section Sorter
Operation
mode
Initializing
Note
Case 1 Trouble
position/
cause
Stapler shift motor trouble /
Stapler shift home position
sensor trouble
Remedy (Check) Check operations
of the stapler shift motor/
stapler shift home position
sensor. (SIM3-1/2)
(Repair) Replace the
stapler shift motor. /
Replace the stapler shift
home position sensor. /
Power Source-ON
(After-work)
Case 2 Trouble
position/
cause
Staple shift mechanism
section trouble
Remedy (Check) Check operations
of the staple shift
mechanism section. (SIM3-
1/2)
(Repair) Repair or replace
the parts of the staple shift
mechanism section. /
Power Source-ON
(After-work)
Case 3 Trouble
position/
cause
Circuit breaker operation
Remedy (Check) Check the cause of
an overcurrent.
(Repair) Reset the circuit
breaker. / Power Source-
ON
(After-work)
Case 4 Trouble
position/
cause
Sorter control PWB trouble.
Remedy (Check) Check operations
of the sorter control PWB.
(SIM3-1/2)
(Repair) Replace the sorter
control PWB. / Power
Source-ON
(After-work)
Main
code
Sub
code
Title
Sorter bin shift motor trouble (Sorter
side detection)
F1 89 Phenomena Display Lamp
Message
Detail The lead cam position
sensor signal is not
recognized within the
specified time after
outputting the bin shift
motor ON signal. / The
guide bar home position is
not recognized within the
specified time after start of
the guide bar operation. /
The rotation sensor output
signal is not recognized
within the specified time
after outputting the bin shift
motor ON signal.
Section Sorter
Operation
mode
Sort/Group operation mode
Note
Case 1 Trouble
position/
cause
Bin shift motor trouble /
Lead cam position sensor
Remedy (Check) Check operations
of the bin shift motor / lead
cam home position sensor.
(SIM3-1/2)
(Repair) Replace the bin
shift motor. / Replace the
lead cam position sensor. /
Power Source-ON
(After-work)
Case 2 Trouble
position/
cause
Bin shift mechanism section
trouble
Remedy (Check) Check operations
of the bin shift mechanism
section. (SIM 3-1/2)
(Repair) Repair or replace
the parts in the bin shift
mechanism section. /
Power Source-ON
(After-work)
Case 3 Trouble
position/
cause
Circuit breaker operation
Remedy (Check) Check the cause of
an overcurrent.
(Repair) Reset the circuit
breaker. / Power Source-
ON
(After-work)
Case 4 Trouble
position/
cause
Sorter control PWB trouble.
Remedy (Check) Check operations
of the sorter control PWB.
(SIM3-1/2)
(Repair) Replace the sorter
control PWB. / Power
Source-ON
(After-work)