Service manual

4-13
CHAPTER 4 REPLACEMENT OF PARTS
J. Controller panel assy
(1) Open the top cover.
(2) Open the feeder unit.
(3) Detach the right side cover. (See Section "C. Face up tray".)
(4) Remove the plate shield assembly. [See Section "G. Print engine controller PCB" (2).]
(5) After unplugging the connector of the control panel assembly, free the hook.
(6) Remove four screws (silver) 1, and detach control panel Assy 2. (Tool No. 1)
Control Panel Assy
1
1
2
Top cover
Feeder unit