Service manual

3-17

CHAPTER 3 INSTALLATION

Placing the printer on the second tray unit.

Note!

The printer weighs Approx. 29kg (with Duplex)/Approx. 26kg (w/o Duplex). It should be

lifted up by two or more persons.

1) Align the holes in the bottom of the printer to the protrusions of the second tray unit.

2) Place the printer gently on the second tray unit.

To detach the second tray unit, follow the same procedure inversely.

Holes in the printer bottom

Protrusions

(3) Installation of duplex unit

This unit is used for printing on two sides of paper.

Note!

For two-sided printing, it is recommended to add an expansion memory. For details,

see "Expansion memories."

Type: AR-C265PADU

Turning OFF the printer power and disconnecting the power cord

Note!

If an expansion memory is installed with the power switched ON, the printer may be

broken.