Service manual

5-36
CHAPTER 5 MAINTENANCE MENUS
Description Level
Ready
LED
Attention
LED
LCD (English)
(
means no display in upper line)
REGISTRATION ERROR n
REGISTRATION SENSOR ERROR n
%COLOR% HEAD DATA ERROR
%TRAY% EMPTY
HARD DISK FULL
DISK WRITE DISABLED
COLLATE FAIL
JOB LOG NOT AVAILABLE
Varies
Varies
Varies
Varies
Varies
Varies
Varies
Varies
On
On
On
On
On
On
Varies
On
When a color registration error is detected with coarse
adjustment, or with the main-scan line adjustment.
PU firmware does not notify this warning to CU firmware
at the time of Shipping Mode. Therefore, this status does
not occur in a user environment.
n
2 = Yellow
3 = Magenta
4 = Cyan
5 =
When a color registration error is detected with the fine
control of registration adjustment, or with the sub-scan
line adjustment.
PU firmware does not notify this warning to CU firmware
at the time of Shipping Mode. Therefore, this status does
not occur in a user environment.
n
2 = Yellow
3 = Magenta
4 = Cyan
5 =
The LED head calibration data is missing or invalid.
Printing can be proceeded without calibrating light
radiation.
PU firmware does not notify this warning to CU firmware
at the time of Shipping Mode. Therefore, this status does
not occur in a user environment.
Y
M
C
K
%TRAY%: The tray is empty. Treated as Warning until
printing to the empty tray is designated.
In this case, Leisus I/F : corresponding bits of both
LFTERR and LFTERR2 should be '0'.
Tray1
Tray2
Disk-full is occurring. Because this is a temporary
warning, it remains until the end of the job and
disappears.
An attempt to write in a read-only file was done.
Because this is a temporary warning, it remains until the
end of the job and disappears.
Memory overflow was occurred in the collate copy. Stays
displayed until the ONLINE key is pressed.
Indicates that the storage device (HDD) for executing
PRINT STATISTICS SYSTEM does not exist.
(Appears when JobAccounting is in operation without
HDD.)
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning