Service manual

5-33
CHAPTER 5 MAINTENANCE MENUS
Description Level
Ready
LED
Attention
LED
LCD (English)
(■
■
means no display in upper line)
■
■
%COLOR% TONER REGIONAL
MISMATCH
■
■
NON GENUINE %COLOR% TONER
■
■
PS3 EMUL ERROR
■
■
ORDER %COLOR% IMAGE DRUM
■
■
ORDER FUSER
■
■
ORDER BELT
■
■
FUSER LIFE
Varies
Varies
Blink
Varies
Varies
Varies
Varies
On
On
Varies
On
(Off)
On
(Off)
On
(Off)
On
The Region ID of toner cartridge is not proper to the
distribution channel.
%COLOR%
Y
M
C
K
The chip of RFID is not compatible.
%COLOR%
Y
M
C
K
Interpreter detects an error due to the following reason.
Receive data after this is ignored until the job
completion. When the job is completely received, this is
automatically cleared.
- The job has a grammatical error.
- The page is complicated, and VM was used up.
The life of the drum (warning). Displayed in a
combination of other message in the first line. The
printer stops at the point when it reaches the drum life
(Shifts to error, OFF-LINE.)
Moreover, when set as "NearLifeLED = Disable",
Attention LED is switched off.
Y
M
C
K
Notifies the fuser unit is near its life.
Moreover, when set as "NearLifeLED = Disable",
Attention LED is switched off.
Notifies the belt unit is near its life. This is a warning;
thus, printing will not stop.
Moreover, when set as "NearLifeLED = Disable",
Attention LED is switched off.
Notifies the life of the fuser unit (warning). Displayed in a
combination of other message in the first line. Warning
only (No Life error).
This appears when the cover was opened and closed
just after the fuser life error occurred.
Also this occurred instead of the fuser life error, if the
"FUSER LIFE PRINT CONTINUE" setting was 'ON'.
Warning
Warning
Warning
Warning
Warning
Warning
Warning