Service manual

5-28
CHAPTER 5 MAINTENANCE MENUS
Details of panel indications
Display
INITIALIZING
INITIALIZING
MENU RESETTING
RAM CHECK
****************
WAIT A MOMENT
NETWORK INITIAL
FLASH ERASE
FLASH CHECK
FLASH FORMAT
It displays, while not having determined the system
display language immediately after turning on a power
supply.
If a display language is determined, it will change to the
display of Priority 2.
The controller side is initializing.
Indicates that EEPROM of the controller side is being
reset.
The condition that EEPROM is reset includes the
followings.
•Changes of CU ROM (when disagreement of CU F/W
version is detected)
•Changes of destination channel
•Compulsive initialization of EEPROM (System
maintenance menu)
•OEM set of PJL command
RAM checking. The rate of checked capacity to the total
capacity is displayed on the 2nd line.
The network is in initializing.
Displays that the content of Flash memory is being
deleted.
Deletion is not conducted unless an explicit specification
is implemented in PJL command.
The PJL command which eliminates a flash memory is
secret to users. Therefore, this status does not occur in
a user environment.
Displays that the content of Flash memory is being
checked.
It is displayed it when Resident/Option Flash memory
not fomented are detected, or "Format Flash ROM" of a
system maintenance menu is performed.
The function mentioned above is secret to users.
Therefore, this status does not occur in a user
environment.
Displays that Flash memory is being formatted.
It is displayed it when Resident/Option Flash memory
not fomented are detected, or "Format Flash ROM" of a
system maintenance menu is performed.
The function mentioned above is secret to users.
Therefore, this status does not occur in a user
environment.
Initializing
Initializing
Initializing
Initializing
Initializing
Initializing
Initializing
Initializing
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Description Level
Ready
LED
Attention
LED
LCD (English)
(■
■
means no display in upper line)