Service manual

5-5
CHAPTER 5 MAINTENANCE MENUS
Maintenance Utility Adjustment Items (3/3)
Operation on
Operator Panel
(Section No. corresponds to
the Maintenance manual)
Item
Section No. of the
Maintenance Utility
Operation
Adjustment
*1: With functional limitation
*2: Models without operator panel) only can be operated.
Note! Items [Prohibited to use] must not be operated/set. There is a risk of abnormal operation
of the printer.
20
21
22
23
24
25
26
Menu Map Printing
(See User’s manual)
Menu Map Printing
(See User’s manual)
Each local print
(See System
Specification.)
Subsect. 5.3.2.3
Subsect. 5.3.2.4
Subsect. 5.3.2.6
Subsect. 5.3.2.7
Check of printer
information
Check of mounted
CPU/memory
values
Test print
Switch scan test *2
Motor clutch test
*2
Color registration
test *2
Density correction
test *2
Section 2.4.1.3.3
Section 2.4.1.3.4
Section 2.4.1.4.1
Subsect. 2.4.1.5.1
Subsect. 2.4.1.5.2
Subsect. 2.4.1.5.3
Subsect. 2.4.1.5.4
Verification of the Mac address and versions
of various F/Ws of the printer.
Verification of the information of CPU and
memory installed on the printer (CPU).
Execution of local print function and
transmission of specified files.
Adjustment purpose: Verification of individual
operation of the printer and transmission of
downloaded files.
Execution of switch scan test.
Adjustment purpose: Operation check of each
sensor.
Execution of motor clutch test.
Adjustment purpose: Operation check of each
motor, clutch, etc.
Execution of color registration test.
Execution of density correction test.
27
28
29
30
Prohibited to use
Subsect.5.3.2.8
Subsect. 5.3.2.9
Subsect. 5.3.2.10
Subsect. 5.3.2.11
Automatic density
correction control
parameter setup *2
[Prohibited to use]
Counter indication
*2
Local parameter
setup *2
Engine parameter
setting *2
Prohibited to use
Subsect. 2.4.1.5.7
Subsect. 2.4.1.5.8
Subsect. 2.4.1.5.9
Setup of automatic density setting control
parameters.
Verification of the counters for consumable
parts, continuance of consumable parts and
waste toner.
Verification of the switching between Factory
mode and Shipping mode, and the state of
Fuse.
Verification of the switching between Factory
mode and Shipping mode, and the state of
Fuse.
20
18
19
Section 5.5.3
Section 5.1
ENG STATUS PRINT
Menu Map Printing
(See User’s manual)
Destination/PnP
data Setting
Display of the
Consumable
Counter
Check of Menu
Settings
Section 2.4.1.2.6
Section 2.4.1.3.1
Section 2.4.1.3.2
Check/setting of destination of the printer
(CU), device ID, USB ID
Confirmation of the current value of the
consumable counter
Displaying each menu setting value specified
in the printer (CU)