Service manual

5-4
CHAPTER 5 MAINTENANCE MENUS
Maintenance Utility Adjustment Items (2/3)
Operation on
Operator Panel
(Section No. corresponds to
the Maintenance manual)
Item
Section No. of the
Maintenance Utility
Operation
Adjustment
5
6
7
8
9
10
11
Invalid operation
Invalid operation
Invalid operation
Invalid operation
Invalid operation
Invalid operation
Invalid operation
Serial Number
information setup
Set information of
PCB items
USB software
update
NIC software
update
NIC Web Page
update
Mac address setup
Consumable part
counter
maintenance
function
Subsect.2.4.1.1.4.3
Subsect. 2.4.1.1.7
Section 2.4.2.2.1
Section 2.4.2.2.2
Section 2.4.2.2.3
Section 2.4.2.2.4
Section 2.4.2.2.4
Selection of the printer serial number recorded
on the CU, and rewrite of the output mode and
device serial numbers.
Verification of the serial No. information and
Factory/Shipping mode.
Update of USB software
Update of NIC software
Update of NIC Web Page
Setup of Mac address
Copying of consumable part counters
Drum counter (Y, M, C, K)
Fuser counter
Belt counter
Toner counter (Y, M, C, K)
Adjustment purpose: When half-used
consumable parts are diverted to another
printer, the value of each consumable part is
copied.
12
16
17
18
19
Prohibited to use
Subsect. 5.3.2.12
Subsect. 5.4.3
Subsect. 5.1
Menu Map print
(See User's Manual.)
Setup of sensitivity
correction value of
color density
sensor [Prohibited
to use]
Indication of LED
head serial
number *1
Setup of
destination/PnP
information
Indication of
consumable part
counters
Check of menu set
values
Prohibited to use
Subsect.2.4.2.2.7.3
Section 2.4.1.2.6
Section 2.4.1.3.1
Section 2.4.1.3.2
Setup of the sensitivity correction value of
color density sensor
Verification of LED head serial number
Setup/verification of the printer (CU)
destination, device ID and USB ID.
Verification of the current values of
consumable part counters.
Indication of the set values of each menu set
on the printer (CU) .