Service manual

AR-C200P Rev.5 89 /
P: No. of test print pages (unit: page)
U: Temperature of top heater [Set value] (unit: Celsius)
L: Temperature of bottom heater [Set value] (unit: Celsius)
T: Environment temperature (unit: Celsius)
H: Environment humidity (unit: percent)
• The display changes by pressing the
33
33
3 key.
• The following messages appear during print operation.
YTR, MTR, CTR, KTR are values of the set transfer voltage. (unit: KV)
• The display changes by pressing the
33
33
3 key.
YR, MR, CR, KR are transfer rollers of each color values of the set transfer voltage. (unit: KV)
5. Repeat Steps 2 to 4 as required.
6. Press the
44
44
4 key to end the test. (Status returns to that described in 1.)
KTR=*.**KV YTR=*.**KV
MTR=*.**KV CTR=*.**KV
KR=*.**KV YR=*.**KV
MR=*.**KV CR=*.**KV
P=*** T=*** U=***[###]
H=***% L=***[###]