MSDS

MATERIAL SAFETY DATA SHEET Page : 3/4
Date Revised : Jul.15.2005
Date Issued : Jul.03.2002
MSDS No. F-01171
8.EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering Measures
Ventilation : Not required under intended use.
Exposure Limit Values
OSHA-PEL(USA) : 15mg/m
3
(Total Dust), 5mg/m
3
(Respirable Dust)
ACGIH-TLV(USA) : 10mg/m
3
(Total Dust), 3mg/m
3
(Respirable Dust)
Personal Protective Equipment
Respiratory Protection : Not required under intended use.
Hand Protection : Not required under intended use.
Eye Protection : Not required under intended use.
Skin Protection : Not required under intended use.
Other Protective Equipment : Use of a dust mask and goggles are recommended when handling a large
quantity of toner or during long term exposure, as with any non-toxic dust.
9.PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Physical State : Solid Form : Powder Color : Black Odor : odorless
Ph : Not applicable
Boiling / Melting Point : Not applicable
Softening Point(°C) : 100 - 150
Flash Point(°C) : Not applicable
lgnition Point(°C ) : No data
Explosion Properties : No data
Density(g/cm³) : 1.1-1.5
Solubility in Water : Negligible
10.STABILITY AND REACTIVITY
Stability : Stable
Hazardous Reactions : Dust explosion, like most finely divided organic powders.
Conditions to Avoid : Electric discharge, throwing into fire.
Materials to Avoid : Oxidizing Materials
Hazardous Decomposition Products : CO and CO
2
Further Information : None