Technical data

Preliminary on-site checkout

Your goal in the preliminary on-site checkout is to eliminate obvious problems, such as

loose or missing cables and connectors.

Checking connections

Before you remove the copier cover:

• Check that external interface cables are plugged into the proper connectors on the side

panel of the copier.

FIGURE I External connectors at the faceplate

•Make sure the power cable is plugged into the wall outlet and that the copier is

powered on.

•Verify the following internal connections:

• AR-P15 connection to the copier at J924

• DIMMs J49 (and J48, with upgrade)

•Optional key chip in motherboard socket U800 (the PS key chip and HDD key

chip are not the same chip)

•Optional HDD cable connection at J207

Network activity LEDs (2)

Copier side panel

10BaseT/100BaseTX connector

for twisted pair Ethernet

Parallel port connector

AR-P15