Troubleshooting guide
Table Of Contents
- CONTENTS
- INTRODUCTION
- BEFORE USING THE MACHINE
- COPY FUNCTIONS
- PRINTER FUNCTIONS
- BASIC PRINTING
- PRINTER DRIVER SETTING SCREEN
- SETTING ADVANCED PRINT FUNCTIONS
- PRINTING MULTIPLE PAGES ON ONE PAGE (N-Up Printing)
- FITTING THE PRINTED IMAGE TO THE PAPER (Fit To Paper Size)
- ROTATING THE PRINT IMAGE 180 DEGREES (Rotate 180 degrees)
- ENLARGING/REDUCING THE PRINT IMAGE (Zoom)
- PRINTING FAINT TEXT AND LINES IN BLACK (Text To Black/Vector To Black)
- ADJUSTING THE BRIGHTNESS AND CONTRAST OF THE IMAGE (Image Adjustment)
- ADDING A WATERMARK TO PRINTED PAGES (Watermark)
- TWO-SIDED PRINTING (AR-5516D/AR-5520D)
- SAVING FREQUENTLY USED PRINT SETTINGS
- OUTLINE OF THE PRINT STATUS WINDOW
- SCANNER FUNCTIONS
- USER SETTINGS
- TROUBLESHOOTING
- ROUTINE MAINTENANCE
- PERIPHERAL DEVICES AND SUPPLIES
7
BEFORE USING THE MACHINE
1
Display
Shows the set number of copies, as well as the copy
ratio, system setting function or setting code, or an
error code when an error occurs.
Numeric keys
Use to select the desired copy quantity or to make
system setting entries. (p.19)
To display the total number of pages output by the
machine, hold the [0] key down. (p.81)
CLEAR key ( )
Clears the copy quantity display or terminates a
copy run.
INTERRUPT key ( ) / indicator
Interrupts a copy run. (p.28)
Light and Dark keys ( , ) / indicators
Use to adjust the TEXT or PHOTO exposure level.
(p.18)
PAPER SELECT key ( )
Use to set the paper size in the paper trays. (p.12,
p.18)
AUTO PAPER SELECT indicator ( )
Paper of the proper size will be automatically
selected depending on the original size and
selected copy ratio when this indicator is on. (p.17)
TRAY SETTING key ( )
Use to manually select a paper tray. (p.12)
AUTO IMAGE key ( ) / indicator
Press for automatic copy ratio selection. (p.19)
SPF/RSPF indicator (when the SPF/RSPF is
installed)
Lights up when originals are set in the document
feeder tray. (p.16)
PRESET RATIO selector keys ( , ) /
indicators
Use to select preset reduction/enlargement copy
ratios. (p.20)
Zoom keys ( , )
Use to select any reduction or enlargement copy ratio
from 25% to 400% in increments of 1%. (p.21)
Copy ratio display key ( )
Hold down when the machine is not in use to
display the copy ratio in the display. (p.21)
ZOOM indicator
Lights up when a zoom ratio is set. (p.21)
Audit clear key ( ) ( )
Closes an open account. (p.63)
READ-END key ( )
Use to check the total number of copies made.
(p.81)
When copying in sort mode and 2 in 1/4 in 1 from the
document glass, press this key when you have
finished scanning the original pages and are ready to
start copying. (p.30, p.31)
CLEAR ALL key ( )
Clears all selected settings and returns the
machine to the initial settings. (p.8)
POWER SAVE indicator ( )
Lights up when the machine is in a power save mode.
(p.8)
START key ( ) / indicator
Press to make a copy (p.15). Also press to exit
"Auto power shut-off" mode and to set a system
setting. Copying is possible when the indicator is
on.
17
18
19
20
21
22
23
AUTO
24
25
AUTO
%
26
27
28
29
30
31
ACC.#-C
32
33
34
35
12
13
14
15
16 17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
353433
32
When there are two or more paper trays