Troubleshooting guide
Table Of Contents
- CONTENTS
- INTRODUCTION
- BEFORE USING THE MACHINE
- COPY FUNCTIONS
- PRINTER FUNCTIONS
- BASIC PRINTING
- PRINTER DRIVER SETTING SCREEN
- SETTING ADVANCED PRINT FUNCTIONS
- PRINTING MULTIPLE PAGES ON ONE PAGE (N-Up Printing)
- FITTING THE PRINTED IMAGE TO THE PAPER (Fit To Paper Size)
- ROTATING THE PRINT IMAGE 180 DEGREES (Rotate 180 degrees)
- ENLARGING/REDUCING THE PRINT IMAGE (Zoom)
- PRINTING FAINT TEXT AND LINES IN BLACK (Text To Black/Vector To Black)
- ADJUSTING THE BRIGHTNESS AND CONTRAST OF THE IMAGE (Image Adjustment)
- ADDING A WATERMARK TO PRINTED PAGES (Watermark)
- TWO-SIDED PRINTING (AR-5516D/AR-5520D)
- SAVING FREQUENTLY USED PRINT SETTINGS
- OUTLINE OF THE PRINT STATUS WINDOW
- SCANNER FUNCTIONS
- USER SETTINGS
- TROUBLESHOOTING
- ROUTINE MAINTENANCE
- PERIPHERAL DEVICES AND SUPPLIES
6
BEFORE USING THE MACHINE
OPERATION PANEL
SCAN MENU key
Use to scan by means of the provided Button
Manager software. (p.48)
SCAN key ( ) / indicator
Press to switch the machine to scanner mode and
scan by means of the provided Button Manager
software. (p.46) The indicator blinks during
scanning and transmission of the scanned data.
ON LINE key ( ) / indicator
Press to toggle the machine between online and
off-line. The indicator lights up when the machine
is online, and goes off when the machine is
off-line. The indicator blinks while the machine is
receiving print data and while printing is paused.
(p.35)
ORIGINAL TO COPY key / indicators
(AR-5516D/AR-5520D)
Press to select one-sided and two-sided copy
modes. (p.24)
Two-sided copies from one-sided originals.
Two-sided copies from two-sided originals.
One-sided copies from two-sided originals.
XY-ZOOM key ( ) / indicator
Press to change the horizontal and vertical copy
ratios independently. (p.21)
DUAL PAGE COPY key ( ) / indicator
Use to make individual copies of the two pages of
an open book or other two-page original. (p.27)
ERASE key ( / ) / indicators
Press to select the "EDGE ERASE", "CENTRE
ERASE" or "EDGE + CENTRE ERASE" mode. (p.34)
ORIGINAL DATA indicator ( )
Blinks when the memory becomes full of scanned
original image data. (p.30, p.32)
SORT/GROUP key ( / ) / indicators
Press to select the "SORT" or "GROUP" mode. (p.29)
2 IN 1 / 4 IN 1 key (
/
) / indicators
Press to select the "2 IN 1" or "4 IN 1" mode. (p.31)
MARGIN SHIFT key ( ) / indicator
Shifts text or image on the copy to leave a binding
margin on the edge of the copy. (p.33)
AUTO/TEXT/PHOTO key ( / / ) /
indicators
Use to select the exposure mode:
"AUTO", "TEXT", or "PHOTO". (p.18)
ORIGINAL key ( ) / ORIGINAL SIZE
indicators
Use to enter the original size. (p.12) The selected
original size will light up.
PAPER SIZE indicators
Light up to show the selected copy paper size. (p.12)
Paper feed location / misfeed location
indicators
The selected paper feed location is shown by a lit
indicator ( ). (p.15)
The general location of misfed paper is shown by a
blinking red indicator ( ). (p.73)
Alarm indicators
[ ] Maintenance indicator (p.72)
[ ] Toner cartridge replacement required
indicator (p.72)
[ ] Developer replacement required indicator
(p.72)
[ ] Paper required indicator (p.72)
[ ] Misfeed indicator (p.72)
1
2
3
4
5
6
7
8
DATA
9
10
11
12
AUTO
13
14
15
16
9
10
2 3 4 5
6 7
8
11
1