Service manual

AR-5127 SIMULATION 8 - 15
Operation/procedure
The trouble error codes are displayed in the sequence of the latest one
first. Max. 40 items of information are stored. (Older ones are deleted
in sequence.) The machine condition can be estimated by this data.
Operation/procedure
ROM and CPU data of each section are displayed.
[Display example]
ROM version 1.250
→
[1.25] (upto 2 decimal places)
The display of the protocol monitor and the soft SW follows this display.
When not installed, “- - - - - - - - - -” is displayed.
*1: The LCD backlight PWB attachment label code is displayed in
three ASCII characters after the version display of 10PE (panel).
(Display, XXX section)
* Execution is inhibited until GDI or PCL board is securely installed.
(Because the board is detected by the software.)
[Label code display content]
Display XXX section content
*2: AB series agents (SRH (Hong Kong), Brazil, Saudi Arabia, STCL,
Indonesia, South Africa, Special Countries, Yemen, Cyprus,
Oman, Qatar, Barren, Kuwait, UAS, SRS, SRSSC)
Operation/procedure
Key operation code is displayed.
Operation/procedure
The data shows the use frequency of each section.
22-4
Purpose Adjustment/setting/operation data output/check
(display/print)
Function
(Purpose)
Used to check the total trouble (self diag) history.
Item Trouble
22-5
Purpose Adjustment/Setting/Check
Function
(Purpose)
Used to check the ROM version of each unit (section).
Item Software
S/N
Machine serial number
PRINTER
PRINTER
MCU
Main Control Unit
NIC
NIC
IMC
IMC
FINISHER
FINISHER
OPE
Panel + Panel label code *1
FAX
FAX
Panel
display
Destination Selection code
Panel software
support language
E/F SEC AJ/AM American English,
French
SECL AL/AC
JP Japan Japanese
BG Other Europe
distributors
BG/BD English, French,
German, Italian,
Dutch, Spanish、
Portuguese
AB series
agents
BE/BT UH1/UQ3/
UQ2/SF4/
UE1/UE4/
UW2/SL4/
UE6
GG SEEG CG/GD English, German,
Turkish, Greek,
Polish, Hungarian,
Czech
DG SES DG/DD English, German,
Swedish, Finnish,
Norwegian, Danish
Sim22-4 TROUBLE 1/4
XX-XX XX-XX XX-XX
XX-XX XX-XX XX-XX
XX-XX XX-XX XX-XX
XX-XX XX-XX XX-XX
Sim22-5 ROM VER.1/2
S/N :0000000000
MCU :00.00
IMC :00.00
OPE :00.00 XXX
*1
CHN China
distributors
BE/BT UE5 Chinese
E/S SCA/SCNZ BA/BN
English, Spanish
SUK BK/BB
Philippine AE/AT UG2
LAG2/LAG4 AE/AT UB5/SF2
E/R English, Russian
TW Taiwan BE/BT English,
Taiwanese
F/E SMEF BE/BT SF1 *2 English, French
GGR English, German,
Turkish, Greek,
Polish, Hungarian,
Czech, Russian
– – – Not defined
22-7
Purpose User data output/Check (Display/Print)
Function
(Purpose)
Used to display the key operator code
Item Data User data
22-8
Purpose Adjustment/setting/operation data output/check
(display/print)
Function
(Purpose)
Used to check the number of use of the staple, the
SPF, and scanning.
Item Counter
SPF
SPF counter
SCAN
Scan counter
STAPLE
Stapler counter
22-9
Purpose Adjustment/setting/operation data output/check
(display/print)
Function
(Purpose)
Used to check the number of use of each paper feed
section. (the number of prints)
Section Paper feed
Item Counter
Panel
display
Destination Selection code
Panel software
support language
Sim22-7 KEY OPE
KEY OPE CODE: nnnnn
Sim22-8 ORG./STAPLE
SPF : nnnnnnn
SCAN : nnnnnnn
STAPLE : nnnnnnn