Service manual

4
AR 250
5. Attach the deck to the tractor.
a) Position the deck below the tractor, with the pivot shaft at the front.
b) Line up the pivot shaft on the deck with the tractor arm and insert. Secure by reinstalling bolt B and
washers as previously assembled.
c) Attach bottom link of tractor arm chain D to the deck with quick pin E. Secure quick pin with cotter pin.
d) Repeat preceding steps for all five cutterdecks.
ASSEMBLY & SET-UP
B
D
E
Install bumper on center cutterdeck.
a) Locate the bumper and bracket in the docu-
ment folder.
b) Install the bumper on the long arm of the
bracket using the flanged nut provided.
Tighten securely.
c) Install the other arm of the bracket under the
bolt at the right rear corner of the center
deck. Tighten securely.