Specifications

38
GENERAL INFORMATION
USER PROGRAMS
4
Select the desired parameter using the numeric keys.
●
The entered parameter number will blink on the right side of the copy
quantity display.
●
The parameters are shown in the table below.
For example, to change the setting of the auto power shut-off timer to
60 min., press key 2.
User programs
Program name Parameters
Auto clear time 0 e OFF 1 e 30 sec. * 2 e 60 sec. 3 e 90 sec. 4 e 120 sec.
5 e 10 sec.
Preheat mode 0 e OFF 1 e 30 sec. 2 e 60 sec. * 3 e 90 sec. 4 e 120 sec.
Auto power shut-off timer * 1 e 30 min. 2 e 60 min. 3 e 90 min. 4 e 120 min. 5 e 240 min.
Stream feeding mode * 0 e OFF 1 e ON
Auto power shut-off setting 0 e OFF * 1 e ON
Border line for 2 in 1 or 4 in 1 * 0 e OFF 1 e ON
Rotation copy 0 e OFF * 1 e ON
Auto paper select mode 0 e OFF * 1 e ON
Auto tray switching 0 e OFF * 1 e ON
Erase width adjustment 0 e 0 mm 1 e 5 mm * 2 e 10 mm 3 e 15 mm 4 e 20 mm
Layout in 2 in 1 copy * 1 e Pattern 1 2 e Pattern 2
Layout in 4 in 1 copy * 1 e Pattern 1 2 e Pattern 2 3 e Pattern 3 4 e Pattern 4
Offset of paper output tray 0 e Upper OFF, lower OFF * 1 e Upper ON, lower ON
2 e Upper ON, lower OFF 3 e Upper OFF, lower ON
●
Factory default settings are indicated with an asterisk (*). For layout in 2 in 1 copy and 4 in 1 copy, see page 61.
If you select “0” (OFF) in a program, the corresponding
function will be disabled.
5
Press the START key.
●
The right-hand number in the copy quantity display will be steadily lit
and the entered value will be stored.
6
To continue with other user programs, press the key
and then repeat steps 2 to 5. To exit the user program
mode, press the light ( ) key.
●
All the alarm indicators will go out.