User Manual

37
7
4
Click the "Utility" tab.
5
Select "Two trays" for "Input tray
option", and click "OK".
6
The printer driver closes. This completes the
settings needed to use the AR-D16.
Misfeed in the lower paper feed area
1
Open the lower side cover
(under the single bypass)
and remove the misfed
paper. If the misfeed ( )
indicator blinks and the
misfed paper is not seen
from the area of the lower
side cover, pull out the
lower paper tray and remove
the misfed paper. Then
close the lower paper tray.
2
Close the lower side cover.
3
Close the side cover by pressing the round projections near
the side cover open button. The misfeed ( ) indicator will go
out and the start ( ) indicator will light up.
If the unit is turned on with the lower side cover open, the misfeed ( )
indicator will blink. In this case, close the lower side cover. The misfeed
( ) indicator will go out.
ページ ２００２年󲦅月󲦄日 水曜日 午前󲦅時５５分