User Manual

34
Misfeed in the SPF
If a misfeed occurs when using the SPF, a number may appear in the display after a
minus sign. This indicates the number of the originals that must be returned to the
original feeder tray after a misfeed. Return the required number of originals. Then
this number will disappear when copying is resumed or the clear ( ) key is
pressed. When the SPF misfeeds an original sheet, the unit will stop and the SPF
misfeed ( ) indicator will blink, while the misfeed ( ) indicator will remain off.
An original misfeed may occur at one of three locations: if the misfed original is seen
from the original feeder tray, (A) in the original feeder tray; if the misfed original is not
seen from the original feeder tray, (B) in the exit area or (C) under the feeding roller.
Remove the misfed original following the instructions for each location.
(A) Open the feeding roller cover and pull the original gently to the left and out
from the original feeder tray. Close the feeding roller cover. Open and close
the SPF to clear the SPF misfeed ( ) indicator. If the misfed original
cannot be easily removed, proceed to (C).
SPF roller
SPF scanning window
Feeding roller cover
ページ ２００２年󲦅月󲦄日 水曜日 午前󲦅時５５分