User manual

Table Of Contents
185
Safety Precautions
AQUOS Xx3
Drying Handset
After exposing handset to water, be sure to dry Receiver,
Volume Up/Down Key, Power Key, Pressure Vent, Mic, Recorder
Mic, External Connection Jack, Speaker, and Earphones-
Microphone Jack.
Wipe handset surface with dry cloth
Holding handset firmly by its sides, shake it about 20 times
・When shaking handset, hold it firmly so as not to drop it.
Pat against dry cloth to remove moisture from openings and
grooves
・Water may be trapped in openings; pat against a dry cloth
to remove it.
Leave handset on dry cloth for approximately 2 - 3 hours at
room temperature
Cautions
When Removing Moisture
Do not put a cotton swab, cloth, etc. into openings; may
affect water resistance.
After Drying Procedure
Do not use handset in wet conditions.
・Calls may fail, or moisture may transfer to clothes, bag,
etc.
・Moisture may short-circuit Earphones-Microphone Jack,
External Connection Jack or other parts.
・Exposure to cold may freeze moisture and cause
malfunction.