User manual

Table Of Contents
14
Charging with AC Adaptor
Purchase and use SB-AC12-HDQC (SoftBank SELECTION
Qualcomm
®
Quick Charge™ 2.0 AC Adaptor for smartphones)
or SB-AC13-HDMU (Micro USB 1.0 A AC Adaptor).
For information on other peripheral devices, see SoftBank
Website.
The following explains how to charge handset using SB-AC12-
HDQC (SoftBank SELECTION Qualcomm
®
Quick Charge™ 2.0 AC
Adaptor for smartphones).
・See User Guide for corresponding AC Adaptor.
・Never connect Micro USB plug while handset or AC Adaptor
is wet.
Insert Micro USB plug of AC Adaptor into External Connection
Jack
・Insert Micro USB plug in correct orientation; otherwise,
External Connection Jack may be damaged. Check contours
and orientation of Micro USB plug, then insert it with tabs
(○) facing down.
Extend blades and plug AC Adaptor into AC outlet
Charging starts and Charging/Notification Lamp
illuminates.
・Charging/Notification Lamp goes out when charge is full.
After charging, remove Micro USB plug from External
Connection Jack, then unplug AC Adaptor and retract blades
Charging by PC
Connect handset to a PC with Micro USB Cable (SHDDL1;
optional accessory).
・Make sure that PC is turned on.
・Charging may not be possible/take a long time depending on
connection and PC conditions.
・Never connect Micro USB plug while handset or Micro USB
Cable is wet.
Insert Micro USB plug of Micro USB Cable into External
Connection Jack
・Insert Micro USB plug in correct orientation; otherwise,
External Connection Jack may be damaged. Check contours
and orientation of Micro USB plug, then insert it with tabs
(○) facing down.
Insert USB plug of Micro USB Cable into PC USB port
Charging starts and Charging/Notification Lamp
illuminates.
・Charging/Notification Lamp goes out when charge is full.
After charging, remove Micro USB Cable from handset and PC