User manual

23
Basic Operations
AQUOS Xx
Operating by Gripping Handset (Grip
Magic)
Set Display to turn on when handset is gripped, or set screen
orientation to not change from vertical to horizontal while
handset is being held.
In app sheet, (Settings)
Useful
Useful window opens.
Grip magic
Grip magic window opens.
・
Alternatively, in desktop sheet, Tap (グリップ設定).
Off
Grip Magic is enabled ( On ).
・
To disable Grip Magic, Tap On ( Off ).
Set each item
Setting is complete.
Grip Sensor
Grip Sensor responds to touch on both the right and left
of handset. As Grip Sensor does not respond when touched
on only one side, be sure to grasp handset contacting Grip
Sensor on both sides.
When letting go of handset, release Grip Sensor on both
sides. If one side remains contacted, Grip Sensor will
continue to react.
Grip Magic Operations
Setting Whether to Turn On Display when
Handset Picked Up
In Grip magic window, Turn screen on by holding
・
Tap Turn screen on by holding to toggle on ( )/off
( ).
・If handset is picked up immediately after (about two
seconds) Pressing to turn Display off, Display may
not turn on when handset is picked up.
・If Proximity/Light Sensor is covered by a hand or other
object, Display may not turn on even when Grip Sensor is
touched, or operation may not be possible. Also, Display
may turn off regardless of handset settings.
Setting Whether to Minimize Volume and Use
Vibrator when Handset Picked Up for Incoming
Call
In Grip magic window, Volume down for incoming calls
・
Tap Volume down for incoming calls to toggle on
( )/off ( ).