User manual

Table Of Contents
174
Close Card Slot Cover
Reinsert hinge as shown ( ), then press Card Slot Cover
back into place by pushing it in the direction of the arrow
( ).
Press ○ areas firmly and make sure that there is no gap
between Card Slot Cover and handset.
Display (Touchscreen)
Handset Display is Touchscreen.
If Display is wet, wipe it with a soft cloth.
・Touchscreen may not respond in these situations:
・Use with gloves/long fingernails
・Use of pens, pencils or sharp objects
・Use with objects on/against Display
・Use while wet
・To prevent malfunctions, do not:
・Touch Display with wet fingers
・Use if Display is wet
・Subject Display to force/pressure
・Place a sticker or shield (commercially-available protective
film, privacy protector shield, etc.) on Display
・To improve response, calibrate Touchscreen as follows.
In app sheet, (Settings) About phone Adjust
touch panel Follow onscreen prompts
In the following cases, Press to turn off Display, Press
again to turn on Display and then operate handset.
・Handset operates automatically without touch input
・Handset does not respond to touch input
TV Antenna Cable
To view or record Full Seg/One Seg, connect TV Antenna Cable
to Earphones-Microphone Port.
・Earphones-microphone can be connected to use with TV
Antenna Cable.
・Insert plug firmly. If plug is not inserted all the way,
broadcasts may not be received or audio may not be heard.
・As connection may be poor if Port is dirty, clean with a dry
cotton swab, etc. Avoid damaging Port when cleaning.
・Do not deform TV Antenna Cable plug or Earphones-
Microphone Port. Deforming may cause malfunction.
・Bringing earphone cord, etc. close to handset may result in
noise.
Earphones-Microphone
Earphones with Mic (SHLDL1) are available for separate
purchase. Other earphones-microphone may not function
properly on handset.
・Do not subject Earphones-Microphone Port to strong impact
while using earphones-microphone; water resistance may be
affected.
Self Check
If handset is unstable, diagnose the cause as follows.
In app sheet, (Settings) Useful Self check
Follow onscreen prompts
Forcing Power Off
If handset has stopped processing or won't respond to
operation, power off forcibly as follows.
(Long Press for at least 8 seconds)
Release finger after vibration; handset powers off.