Specifications

17
Display
AVC System
Turning on the power
Before turning on the power make sure you have completed
required connections. (See pages 7 and 13.)
POWER indicator
POWER button
POWER button
POWER indicator
1
2
Turning off the power
Press POWER button on the remote control unit or POWER
button on the Display.
• The System enters standby mode and the image on the screen
disappears.
• Both POWER indicators change from blue to red.
Press POWER button on the Display.
• The POWER indicator on the Display gradually turns off.
• When the System is turned off by POWER button on the Display,
you cannot turn on the power by pressing POWER button on the
remote control.
NOTE
• If you are not going to use this System for a long period of time, be sure to
remove the AC cords from the power outlet.
• Weak electric power is still consumed even when both POWER button on
the Display and POWER button on the AVC System are turned off.
Watching TV
Press POWER button on the Display.
• POWER indicator (blue): The System is on. (After a few
seconds, programme information appears with sound.)
• POWER indicator (Red): The System is in standby. (Go
to step 2.)
Use any of the methods below to power on. Powering
on changes the indicator from red to blue.
• Press POWER button on the AVC System.
• Press POWER button on the remote control.
POWER indicator
Power off
The System is in standby mode.
The System is on.
Off
Red
blue
NOTE
• Check if the system cable is connected properly when display indicator flashes red.
LC-45G1X(E)-b 04.10.15, 10:00 AM17