SHARR AQUOS LC-70LE550U LC-60LE550U LIQUID CRYSTAL TELEVISION 1245 Supplied Make sure the 4=TJ ,MPORTA.T :P,ease read this operat,on manuo, L_,,_ starting operating equipment. NYCE before the Accessories following accessories are provided with the product. f Remote control Page 9 unit (x 1) [] Connection "AA" size battery (× 2) Page 10 Stand unit (× 1) Page 7 guide ( × 1) , Always use the AC cord supplied with the TV.
IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear and left side of the TV. IMPORTANT WARNING: [ Model No.: I Serial No.: INFORMATION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT RAIN OR MOISTURE.
iMPORTANT iNFORMATiON DECLARATION OF CONFORMITY: SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-70LE550U/LC-60LE550U This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid of trouble-free operation of your product, please using this product, Crystal Television. read the Important IMPORTANT INSTRUCTIONS SAFETY To ensure safety and many years Safety Instructions carefully before Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
iMPORTANT SAFETY iNSTRUCTiONS • Outdoor Antenna Grounding If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and builbup static charges.
iMPORTANT fCaring • • SAFETY iNSTRUCTiONS for the Liquid Crystal panel Turn offthe main power and unplug theAC cord from the wall outlet before handling. Gently wipe the surface of the display panel with a soft cloth (cotton, flannel, etc.). To protect the display panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet!dry • • • _. _ _. _ _ Wiping with a hard cloth or using strong force may scratch the surface of the display panel. sheeta type Use soft damp cloth, cloth etc.).
QUICK REFERENCE 3 _ Insert the stand into the openings of the TV. on the bottom o Make sure that the stand is limply inserted into the TV. Improper installation may result in tilting of the TV set. o Before attaching the stand, make sure to turn off the TV and unphJg the AC cord. o Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. Insert and tighten the 4 screws on the rear of the TV.
QUICK REFERENCE " • |" e| I" A . o This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP), The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. , Installing the TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves, SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.
QUICK REFERENCE e1 Attach your antenna (See page 10.) 2 Connect outlet. to the back of the television. the AC plug for the television into the AC - • m ._ - An HD'I'V without an HD source is just an ordinary "iV.
Preparation To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. fl.A 75 ohm system is generally a round cabb with F type connector _F that can easily be attached to a terminal without toob (Commercially available). _- 2.
Part Names m • I| • " I "1 MENU POWERbutton button'' I_il[i _ ,NPUT button J_H _Hnn/' buttonsJ til [ ::::....... "1 See pages 13 and 18 for button operations. •20PC: Optical Picture Control (See page 19.
Connecting to External Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See page 16.) For connecting the TV to external equipment, use commercially available cables. , The illustrations of the terminals are for explanation purposes and may vary slightly from tile actual products. • To protect equipment, always turn off the TV before connecting any external equipment.
Watching "iV Press POWER power on. on the TV or on the remote control unit to turn the o The Initial Installation starts when the TV powers on for the first time. if the TV has been turned on before, the Initial Installation will not be invoked. For changing the settings of the Initial Installation, perform "EZ setup" on the Setup menu on page 21. POWER--_ Press POWER on the TV or on the remote control unit again to turn the power off.
Direct Button Operation You can change the volume by pressing the TV or on the remote control unit. VOL +/- on To increase the volume, press VOL +. To decrease the volume, press VOL -. @} Audio status When "Output Select" is set to "Variable", the indicator on the screen changes as shown below. See page 25 for details on the Output Select function. Mutes the current Press MUTE. sound output. "(_" will be displayed on the screen for 40 seconds, and the sound is silenced.
Direct Button Operation AV Mode gives you several viewing options to choose [] MTS/SAP from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of device connected. There are seven pre-set AV Modes: STANDARD (ENERGY STAR), MOVIE, GAME, PC, USER, DYNAMIC and DYNAMIC (Fixed). You can use USER Mode to create customized settings for each TV input.
Direct Button Operation Allows you to capture and freeze a moving you are watching. Press FREEZE. o A moving image is captured. o Press FREEZE again to cancel the function. image that Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV. Closed Captions are available on some TV programs and on some VHS home video tapes at the discretion of the program provider.
Direct Button Operation You can select the screen size. Press ViEW MODE to toggle between view modes. [] For HD programs Stretch Dot by Dot (Fall Suitable tot viewing widescreen 1.78:1 aspect ratio program, stretch mode will still show very thin black bands at the top and bottom ot the screen, Zoom Screen) Dot by Dot (1080i/p only): Detects the resohJtion ot the signal and displays an image with the same number of pixels on the screen.
On-Screen Display Menu Example Example ® ® ® Item displayed in light blue • This indicates the item currently selected. ® This indicates ® Press 2 (t_ Press MENU _/_. to select the desired (25 Press A/Y to select a specific to display the MENU screen. item. :_3_Press 4/1_ (or ,_,/_') to select or adjust the desired setting, and then press ENTER. 3 Press MENU to exit. II Using the remote control Use the following buttons on the remote operate the menu. for the item.
On-Screen Adjusts Display the picture following Menu to your preference For a better white correction. High: with the picture settings. Example balance, use color temperature White with bluish tone Middle: Mid-High: Mid-Low: Low: White with reddish tone Use Motion Enhancement more clearly. On(High)/On(Low}: Off: Normal image. to view fast-action video For obtaining a clearer image. o "Motion Enhancement" may cause image noise. If this occurs, turn the function "Off".
On-Screen • • Display • Menu - You carl adjust with the following =e the sound quality to your preference - Power control settings. • setting • alows you to save energy. Example Example Treble For weaker treble For stronger treble Bass Balance For weaker bass Decrease audio For stronger bass Decrease auclo from the right speaker from the left speaker This function allows the TV to automatically shut the power down when there is no signal received.
On-Screen Display Menu Lets you set the input terminal displayed when using the INPUT SOURCE menu or channel display. Press _1/1_ to select the new name for the input mode. Example m Setting the Names to Your Preference 1 Press 41/1_ to select "Custom". 2 Press A/T" to enter the desired characters. • You can use alphanumeric characters (including spaces or some symbols) to set the name to your preference. o If you press T when "Default" is selected, the "Custom" setting display appears.
On-Screen Display Menu Used to enable or disable the parental control function. This function will not be selectable from the menu if you do not first configure your secret number. On: Enables Parental CTRL Off: Disables Parental CTRL You can also select a language from the Setup menu. Select from among 3 languages: English. French and Spanish. _'_"_!_ ............
On-Screen Display [] TV Parental Menu Guidelines Pressj,/T to adjust the item to your desired position. "Block" indicates the item is blocked. Press MENU to exit. Example Example When item: setting an individual content-based rating 1 Press _, or ENTER to access blocked content iterns from the currently selected age-based rating item. 2 PressA/Y to select an individual item, and then press ENTER to unblock it ("Block" is removed). Repeat the same steps for the other items.
On-Screen Display Menu Canadian Rating Systems (Canadian English ratings and Canadian French ratings) o The TV rating systems in Canada are based on the Canadian Radio Tebvision and Tebcommunications Commission (CRTC) policy on viobnce in tebvision programming. o While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
On-Screen Display Menu You can select a desired Closed Off/CCI-CC4/TEXTf-TEXT4 Example You can select a desired Off/Servicer-Service6 Caption. service. mMode Default: The default settings will be displayed. Custom: You can adjust the closed caption screen appearance to suit your preference. The following items can be adjusted.
On-Screen Display Menu Some input signals may have to be registered manually to display properly. The pair of input signals (resolutions) in the list below is not distinguishable when received, 2 Press MENU to display the MENU press 4/_ to select "Option". 3 Press A/_' to select "Software press I_ or ENTER. In such a case, you have to set the correct signal manually. After setting once, it will display when the same signal (resolution) is input again.
Appendix Problem Possible Solution o No power o Check if you pressed POWER on the remote control unit. ,_ Page 13 If the indicator on the TV does not light up, press POWER on the TV.
Appendix Problem Possible o o , No pi_ure o o Solution Is connection to other components correct? ,,_ Page 12 Is the correct input selected? _ Page 16 Is "On" selected in "Audio Only"? _ Page 25 If the PC image is not displayed, check the tollowing: When connecting a laptop PC to the TV, check that display output mode of the PC is set to external monitor. Check the resolution setting on the PC.
Appendix Item Model: LC-70LE550U LCD Size 70" Class (69 _/2"Diagonal) panel Resolution 2,073,600 pbxels (1,920 x 1,080) TV standard (CCIR) TV Function American TV Standard ATSC/NTSC System VHF/UHF VHF 2 13ch, UHF 14 69ch CATV 1-135ch (non-scrambled Receiving Channel Model: LC-60LE550U 60" Class (60 _/s2"Diagonal) channel only) Digital Terrestrial 2 69ch Broadcast (8VSB) Digitalcable*_ (64/256QAM) Audio multiplex 1 135ch (non-scrambled channel only) BTSC System Audio out 10W x 2 HDMI
information on the Software [] Software composition The software included in this product is comprised are held by SHARP or by third parties.
Calling for Service For location of the nearest Sharp Authorized Service, or to obtain customer assistance, please call 1-800+BE-SHARP. LIMITED SHARP _n its defective This warranty changed, or their home your not or apply dghts include To the extent permitted OTHER WARRANTIES IMPUED OF SUCH SPECIFIC for peded gNen the time of time respensiMe, full this consumer Hmited Product vary.
| | | LiMiTED WARRANTY Consumer Electronics Products Congratulations on your purchase! [] Sharp Elec_eda Ltd.
