ENGLISH FRANÇAIS ESPAÑOL LC-19DV28UT LC-22DV28UT COMBINATION LIQUID CRYSTAL TELEVISION AND DVD/CD PLAYER COMBINÉ TÉLÉVISEUR ACL ET LECTEUR DVD/CD COMBINACION TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO CON DVD/DISCOS COMPACTOS OPERATION MANUAL MODE D’EMPLOI MANUAL DE OPERACIÓN IMPORTANT : Please read this operation manual before starting operating the equipment. IMPORTANT : Veuillez lire ce mode d'emploi avant de commencer à utiliser l'appareil.
54W0131B.
ENGLISH LC-19DV28UT LC-22DV28UT COMBINATION LIQUID CRYSTAL TELEVISION AND DVD/CD PLAYER ENGLISH OPERATION MANUAL IMPORTANT: • To aid reporting in case of loss or theft, please record the TV/DVD’s model and serial numbers in the space provided. The numbers are located at the rear of the TV/DVD. Location of the required Marking The rating sheet and the safety caution are on the rear of the unit. Model No.: Serial No.
IMPORTANT INFORMATION WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Combination Liquid Crystal Television and DVD/CD player. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled.
IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
IMPORTANT SAFETY INSTRUCTIONS Caring for the Liquid Crystal panel • Turn off the main power and unplug the AC cord from the wall outlet before handling. • Gently wipe the surface of the display panel with a soft cloth (cotton, flannel, etc.). To protect the display panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/ dry sheet type cloth, etc.). This may damage the surface of the display panel.
Disc ■ Discs which can be played back In this unit, use only discs that meet the standard, such as those bearing the below logo marks on the disc label surface. If you use a non-standard disc, we cannot guarantee playback. Even if such a disc can be played back, we cannot guarantee the image or sound quality. The DVD logo is a registered trademark.
Disc ■ Title/Chapter/Track PC-created disc • You may not be able to play discs recorded using a personal computer or recorder for disc compatibilities, scratches or marks on the disc, dirty lenses of the unit or condensation and so on. • Discs recorded using a personal computer may not be playable in this unit due to the setting of the application software used to create the disc. In these particular instances, check with the software publisher for more detailed information.
Supplied accessories Make sure the following accessories are provided with the product. Remote control unit (×1) Page 10 “AA” size battery (×2) Page 10 AC cord (×1) Page 9 Stand unit (×1) and Screws (×3) Page 8 Operation manual (×1) NOTE • Always use the AC cord supplied with the TV/DVD. QUICK REFERENCE Attaching the stand • Before attaching (or detaching) the stand, unplug the AC cord from the AC input terminal. • Before performing work spread cushioning over the base area to lay the TV/DVD on.
QUICK REFERENCE QUICK INSTALLATION TIPS 1 Attach your antenna to the back of the TV/DVD. (See page 14.) 2 Connect the AC plug for the TV/DVD into the wall outlet. AC outlet • Place the TV/DVD close to the AC outlet, and keep the power plug within reach. NOTE • TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED. 3 How to turn on the TV/DVD for the first time. A) Press POWER on TV/DVD.
QUICK REFERENCE If the remote control fails to operate TV/DVD functions, replace the batteries in the remote control unit. 1 Open the battery cover. 2 Insert two “AA” size batteries (supplied with the product). 3 Close the battery cover. • Place the batteries with their terminals corresponding to the (+) and (–) indications in the battery compartment. NOTE Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Contents IMPORTANT INFORMATION ................................... 1 License information ................................................ 2 DEAR SHARP CUSTOMER ..................................... 3 IMPORTANT SAFETY INSTRUCTIONS .................. 3 Disc ........................................................................... 6 Supplied accessories ............................................. 8 QUICK REFERENCE ................................................ 8 Attaching the stand ......................
Part names TV/DVD (Front) TV/DVD (Left) Disc slot EJECT button Volume (VOL+/–)/ ◀/▶buttons Remote control sensor POWER indicator Channel /▲/▶PLAY button Channel /▼/ STOP button MENU button INPUT/ENTER button POWER button NOTE • The buttons on the main unit have the same functions as the same buttons on the remote control. Fundamentally, this operation manual provides a description based on operation using the remote control.
Part names 4 5 Remote control unit 6 14 15 16 7 1 2 3 4 5 6 17 18 19 8 20 9 21 22 23 24 25 10 11 12 13 14 7 8 26 15 9 27 16 17 10 11 12 13 28 29 30 31 NOTE • When using the remote control unit, point it at the TV/DVD. (See page 10.) There is a protective film covering the face of the remote control. Please remove this film before use. 18 19 20 21 22 23 24 25 26 27 1 2 3 POWER: Switch the power on or enters standby mode. (See page 20.) 0–9: Set the channel. (See page 20.
Preparation Using the remote control unit Use the remote control unit by pointing it towards the remote control sensor on the TV/DVD. Objects between the remote control unit and the remote control sensor may prevent proper operation. Cautions regarding remote control unit • Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity. • Do not install or place the remote control unit under direct sunlight.
Using external equipment Experiencing HD images An HDTV without an HD source is just an ordinary TV/DVD. To enjoy HD images on the TV/DVD, you should get HD programming from the following: • Over-the-air broadcasting via HD quality antenna • HD cable/satellite subscription • HD compatible external equipment NOTE • For information on updating to HD programming, ask your cable/satellite service provider. Types of Connection Image quality differs depending on the terminal used.
Connecting to External Equipment You can connect many types of external equipment to your TV/DVD. To view external source images, select the input source from INPUT on the remote control unit or on the TV/DVD. (See page 15.) For connecting the TV/DVD to external equipment, use commercially available cables. CAUTION • To protect equipment, always turn off the TV/DVD before connecting any external equipment. • Please read the relevant operation manual (Blu-ray disc player, etc.
Connecting to External Equipment ■ When using Component cable (INPUT 2): • Blu-ray disc player • DVD player • HD cable/satellite set-top box Component video cable Rear of the TV PB (Blue) PR (Red) Y (Green) AUDIO-L (White) AUDIO-R (Red) COMPONENT OUT Audio cable NOTE • See page 16 for connecting a Blu-ray disc player, DVD player or an HD cable/satellite set-top box to the HDMI terminal.
Connecting to External Equipment Connecting an Audio Amplifier ■ When using coaxial cable: It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. Rear of the TV Coaxial cable COAXIAL DIGITAL AUDIO INPUT Connecting a PC ■ When using HDMI cable (INPUT 3): Rear of the TV HDMI-certified cable HDMI OUT NOTE • Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified cable to the INPUT 3 (HDMI) terminal.
Connecting to External Equipment ■ When using analog RGB cable (INPUT 4): Rear of the TV Analog RGB cable (D-sub 15pin cable or VGA cable) RGB AUDIO Ø 3.5 mm stereo minijack cable NOTE • When using an analog RGB cable, input the audio signal to the AUDIO PC/HDMI terminal of INPUT 4. Displaying an image from a PC To view an image from a PC, perform the following procedure. ① Select the Input 4 (PC) mode using INPUT on the remote control or the TV/DVD set. (See page 15.) ② Select the PC input signal.
Watching TV Preparation Select the TV mode Perform the following steps before you press POWER on the remote control unit. 1 Insert the batteries into the remote control unit. (See page 10.) 2 Connect the antenna cable to the TV/DVD. (See page 14.) 3 Plug in the AC cord to the AC outlet. (See page 9.) Turning on the power Press POWER on the TV/DVD, or POWER on the remote control. TV status indicator (POWER) ON Lighting (Green) OFF/Standby Lighting (Red) • POWER indicator (Green): The TV/DVD is on.
Watching TV Display the channel information Auto Ch Memory Press DISPLAY to display the current channel (or input source) information on the screen. When the TV receives a digital signal, the digital information will appear for a few seconds. Auto Ch Memory makes the TV/DVD look for all channels viewable in the set area. 1 Press TV MENU and the MENU screen displays. 2 Press ▲/▼ to select “Channel”, then press ▶ or ENTER. • • • • • • Press ▲/▼ to select “Auto Ch Memory”, then press ▶ or ENTER.
Watching TV Selecting the digital audio language When two or more audio languages are included in a digital signal, you can select one of the audio languages. 1 In digital TV mode, press AUDIO and the “Audio Language” menu screen displays. 2 Press ▲/▼ or 0-6 to select your desired language. 3 Press EXIT to return to the normal screen. NOTE • Digital audio is active only when receiving digital boardcasting, not when receiving analog boardcasting. View mode for 4:3 programs 1 Press VIEW MODE.
Watching TV Closed captions and digital closed captions NOTE • Closed Caption might not appear according to the condition of the signal from the broadcasting station. Your TV/DVD is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV/DVD. Closed Captions are available on some TV programs and on some VHS home video tapes at the discretion of the program provider.
Watching TV Caption setup This function allows you to adjust the closed caption screen appearance to suit your preference. 1 Press TV MENU and the MENU screen displays. 2 Press ▲/▼ to select “Setup”, then press ▶ or 3 4 5 6 7 ENTER. Press ▲/▼ to select “Closed Caption”, then press ▶ or ENTER. The Closed Caption menu displays. Press ▲/▼ to select “Digital CC Preset”, then press ◀/▶ to select “Custom”. Press ▲/▼ to select “CC Advanced”, then press ▶ or ENTER.
Watching TV Parental control (V-CHIP) V-CHIP might not function according to the condition of the signal from the broadcasting station. V-CHIP is an electronic filtering device built into your TV/DVD. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your TV/DVD.
Watching TV Canadian rating systems • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. • While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
Other convenience functions Menu operation buttons Quick guide for MENU operation Use the following buttons on the remote control to operate the menu. example : Select Language 1 Press TV MENU and the MENU screen displays. Main Menu Picture >> Audio Channel Lock Setup ENTER : Set : Select 2 Press ▲/▼ to select “Setup”, then press ▶ or ENTER. Press ▲/▼ to select “Language”.
Other convenience functions Icon Picture Selected item Picture Setting DBC Brightness / Contrast / Sharpness / Color / Tint Color Temperature Backlight On / Off AV Mode Sports Standard Description You can adjust the picture quality to your preference. Bluish (Cool) / Neutral (Standard) / Reddish (Warm) Backlight adjusts the screen brightness for improved picture clarity. Use this feature to change the Black level automatically according to the brightness of an image.
Watching the DVD Preparation Perform the following steps before you press POWER on the remote control unit. 1 Insert the batteries into the remote control unit. (See page 10.) 2 Plug in the AC cord to the AC outlet. (See page 9.) Turning on the power Press POWER on the TV/DVD, or POWER on the remote control. • POWER indicator (Green): The TV/DVD is on. (“Please wait” will appear for a few seconds on the screen.) Select the DVD mode Press TV/DVD to select the DVD mode.
Watching the DVD Special playback Fast Forward Playback Press FWD during normal playback. Each press of FWD will increase the speed of the search. • To resume normal playback, press PLAY. Review Playback Press REV during normal playback. Each press of REV will increase the speed of the search. • To resume normal playback, press PLAY. Still Playback Press STILL/PAUSE during normal playback to pause playback. • To resume normal playback, press PLAY or STILL/ PAUSE.
Watching the DVD Marking desired scenes The TV/DVD stores the points that you want to watch again up to 12 points. You can resume playback from each scene. Marking the scenes 1 Press MARKER during playback. Changing soundtrack language You can select the language when you play a multilingual disc. 1 Press AUDIO during playback. The current soundtrack language will appear.
Watching the DVD Using HOME MENU Play mode Playing a disc A-B repeat playback A-B repeat playback allows you to repeat selection between two selected points. 1 Press SETUP during stop mode. HOME MENU will appear. 2 Press ▲/▼/◀/▶ to select “Disc Navigator”, then press ENTER. HOME MENU DVD Audio Settings Video Adjust Play Mode Disc Navigator 1 Press PLAY MODE during playback. Play Mode screen will appear.
Watching the DVD Program playback Audio Settings menu 1 Press PLAY MODE during playback. Play Mode screen will appear. 2 Press ▲/▼ to select “Program”, then press or ENTER. 3 Press ▲/▼ to select Program Current Title:02 Chapter:001 “Create/Edit”, then press ENTER. “Create/ Edit” display differs, depending on discs or files. 4 Press ▲/▼/◀/▶ to select Title, Chapter, Track or File, then press ENTER. Program Step Title 1-38 Chapter 1-004 01. 01 02. 03. 04. 05. 06. 07. 08.
Function setup Watching the DVD Video Adjust menu Customizing The Function Settings From the Video Adjust menu you can adjust various settings that affect how the picture is presented. 1 Press SETUP during stop mode. Setting procedure HOME MENU will appear. 2 Press ▲/▼/◀/▶ to select “Video Adjust”, then press ENTER. HOME MENU DVD Audio Settings Video Adjust Play Mode Disc Navigator Initial Settings 3 Press ▲/▼/◀/▶ to setting the option, then press ENTER.
Function Setup Customizing The Function Settings Setting Option Description Digital Audio Out settings Digital Out On Digital audio is output from the digital outputs. Off No digital audio output. Dolby Digital Out Dolby Digital Dolby Digital encoded digital audio is output when playing a Dolby Digital DVD disc. Dolby Digital > PCM Dolby Digital audio is converted to PCM audio before being output. DTS Out DTS DTS encoded digital audio is output when playing a DTS disc.
Function setup Parental Control Level Change Some discs are specified as not suitable for children. Such discs can be limited not to playback with the unit. How to into the Parental menu (0–9) to input the current password, then press ENTER. HOME MENU will appear. 2 Press ▲/▼/◀/▶ to select HOME MENU DVD Audio Settings Video Adjust Play Mode Disc Navigator Initial Settings 3 Press ▲/▼ to select “Options”, then press ▶ or ENTER. Then press ▶ or ENTER to enter the Parental Lock menu.
Appendix Language Code List Language (Language code letter), Language code Japanese (ja), 1001 English (en), 0514 French (fr), 0618 German (de), 0405 Italian (it), 0920 Spanish (es), 0519 Chinese (zh), 2608 Dutch (nl), 1412 Portuguese (pt), 1620 Swedish (sv), 1922 Russian (ru), 1821 Korean (ko), 1115 Greek (el), 0512 Afar (aa), 0101 Abkhazian (ab), 0102 Afrikaans (af), 0106 Amharic (am), 0113 Arabic (ar), 0118 Assamese (as), 0119 Aymara (ay), 0125 Azerbaijani (az), 0126 Bashkir (ba), 0201 Byelorussian (be),
Appendix Troubleshooting Problem • No power • Unit cannot be operated. • Remote control unit does not operate. Possible Solution • Check if you pressed POWER on the TV/DVD, or on the remote control unit. (See page 20.) • Is the AC cord disconnected? (See page 9.) • Has the power been turned on? (See page 20.) • External influences such as lightning, static electricity, may cause improper operation.
Appendix Troubleshooting-DVD Problem Possible Solution • Playback doesn’t start. • No disc is inserted. (See page 29.) • The disc may be dirty. Clean up the disc. (See page 7.) • The TV/DVD cannot play CD-ROMs, etc. (See page 6.) • No picture. • TV/DVD selector is not set correctly. (See page 29.) • No sound. • Check the input selector of the amplifier is set properly. • The TV/DVD is in the special playback mode. (See page 30.) • Select the correct Audio Output position on AV amplifier.
Appendix Specifications Item LCD panel Size Resolution TV Function Model: LC-22DV28UT 19” Class (18 1/2” Diagonal) 22” Class (21 1/2” Diagonal) 1,049,088 pixels (1366 x 768) TV-standard (CCIR) Receiving Channel Model: LC-19DV28UT American TV Standard ATSC/NTSC System VHF/UHF VHF 2-13ch, UHF 14-69ch CATV 1-135ch (non-scrambled channel only.) Digital Terrestrial 2-69ch Broadcast (8VSB) Digital Cable*1 (64/256 QAM) Audio multiplex Audio out 1-135ch (non-scrambled channel only.) BTSC System 1.
Calling for Service For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
