Specifications

E-58
AN-PR1500H
1
ENGLISH
3
6
7
8
9
8
4
3
2
References
Troubleshooting chart
Many potential problems can be resolved by the owner without calling a service
technician.
If something is wrong with this product, check the following before calling your
authorised SHARP dealer or service centre.
 General
 DVD player
Symptom Possible cause
z The power is not turned on. z Is the unit unplugged?
z No sound is heard. z Is the volume level set to “0”?
z Are the speaker wires disconnected?
z The sounds from speakers are
not well balanced.
z Are the speaker wires connected to the
wrong channels?
z Noise is heard during playback. z Move the unit away from any computers or
mobile phones.
z When a button is pressed, the unit
does not respond.
z Set the unit to the power stand-by mode
and then turn it back on.
z If the unit still malfunctions, disconnect the
unit from the mains for 30 seconds, then
reconnect.
z Interference or noise occurs on
the TV image.
z Is the unit placed near TV with internal
aerial? Use an external aerial.
z The display on the unit is dark. z Is the display in the dimmer mode?
z No images are displayed. z Is the TV turned on?
z Is the TV input switched on?
Symptom Possible cause
z Even though a disc is loaded, “No
Disc” is displayed.
z Is the disc loaded upside down?
z Is the disc very dirty?
z Does the disc satisfy the standards?
z Is the unit located near excessive
vibrations?
z Playback sounds are skipped. z Is condensation formed inside the unit?
z The control buttons do not
function. Music or video playback
is interrupted.
z Is the disc very dirty?
z Does the disc satisfy the standards?
z Is the unit located near excessive
vibrations?
z Is condensation formed inside the unit?
z Pictures and sound are skipped. z Is the disc very dirty?
z Is the unit located near excessive
vibrations?
z Is condensation formed inside the unit?
z The unit does not operate even if
the power is on.
z Is a disc other than a DVD (region number
at the back of the unit), audio CD, CD-R or
CD-RW loaded?
z Images cannot be played back.
(Sound is not heard.)
z Are the video and audio cables connected
improperly?
z Is a disc other than a DVD (region number
2 or ALL), audio CD, CD-R or CD-RW
loaded?
z Is the disc very dirty?
z Is the disc loaded upside down?
z Is the optical pick up dirty?
z Is the TV input set to video (VIDEO 1,
VIDEO 2, etc.)?
z Is the unit turned on?
AN-PR1500H_EN.indd 59AN-PR1500H_EN.indd 59 4/10/08 2:30:55 PM4/10/08 2:30:55 PM