Specifications

Using in a Wireless
Environment
-27
2 Turn on the computer.
If the “Image Transfer” has been registered to the startup folder during installation,
proceed to step 4.
3 Click the “Start” menu, “Programs”, “Sharp Wireless Reality”, and then
click “Image Transfer”.
The projector icon will then be added to the taskbar.
4 Right click the projector icon on the status bar, and then click “Settings”
on the pop up menu.
5 Click the transmission projector in the “Setting” dialog box.
• If the projector name is not displayed on the “Projector” tab in the “Setting”
dialog box, click “Scan Projector”.
• Make sure that the “Projector Name”, “IP Address” and “MAC Address” on the
screen are same as those on the projector setting screen. If not, the data will
be transmitted to other projectors besides the projector you want to transmit
to.