Specifications

-26
Transferring Images to the Projector (Image Transfer)
The following explains how to transfer images from a computer to the projector
and projecting them via the projector.
The same image can be displayed simultaneously on up to 4 projectors.
1. Starting and Exiting
The following explains how to start and exit the “Image Transfer” program.
Make sure to turn on the projector first when sending images to the projector
using a wireless LAN PC card. When “Standby” is displayed on the screen, turn
on the computer.
Starting
1 Turn on the projector and make sure that it is ready for transmission.
• Make sure to install the wireless LAN PC cards supplied with the projector or the
wireless LAN PC card “AN-WC11B” (sold separately) into the PC card slot (INPUT
4) on the projector and into the PC card slot in the computer.
• For installation procedures, see the projector operation manual as well as the
computer operation manual.