Specifications

-20
4 Click “Change Network”.
The “Confirmation” dialog box is displayed.
If “Change Network” appears gray, “Quick Connection” has already been set.
Click “Close”, and exit “Network Selector”.
5 Click “Yes”.
The computer restarts.
The computer settings will be changed after restarting the computer, and you can
connect to the projector via a wireless LAN.
The network settings for “Quick Connection” are as follows:
■ On the projector:
IP Address 192.168.150.150
Subnet Mask 255.255.255.0
Gateway 192.168.150.1
Channel 11ch
SS ID SHARP_PRJ
DHCP Server function On
Assign start address 192.168.150.151
Number of maximum addresses
10 addresses
that can be assigned
■ On the computer:
IP Address From DHCP Server
Subnet Mask From DHCP Server
Gateway From DHCP Server
Channel 11ch
SS ID SHARP_PRJ
Transmission mode 802.11 AdHoc mode
Encryption None