Specifications
-88
Displaying Dual Pictures (Pict in Pict)
Picture in Picture function allows you to display two pictures on the same screen. You can
display the image input from INPUT 2 or 3 as an inset picture overlapping the main picture
from INPUT 1. (This function can only be set in the RGB menu.)
-88
Adjustment
buttons ('"\ |)
INPUT
button
Enter button
Displaying the Inset Picture
Select “Pict in Pict” in the “Options (1)”
menu on the menu screen.
Make sure
to operate after signals have been en-
tered in INPUT 1, INPUT 2 and INPUT 3.
➝
For operating the menu screen, see
pages 50 to 55.
1 Press
to select .
• Select to clear the Pict in Pict mode
Note
• When operating with the
GyroRemote, press
to display
“Button Assign 3/5” and press
4
.
• Pict in Pict does not function with
INPUT 4.
2 Press
to change the image
in the inset picture.
3 Press
,
,
or
to set the position of the inset
picture.
• Press
to stop the frame from mov-
ing or to make the frame disappear.
Note
• Hold down
and move the
GyroRemote in all directions, when
moving the position of the inset pic-
ture using the GyroRemote.
UNDO
button