Instruction manual

CAM.
POS. TAKE
1 1 Static Wide shot of the entire performance area.
1 2 Wide shot of each performer. Give each person 1/3 of the song.
2 1 Static Wide shot of the entire performance area during the first half
of the song, and a Static Medium shot of the left side of the
performance area, during the second half.
3 1 Alternate Close-Up and Medium shots. Each shot should last
about 20 seconds.
4 1 Static Close-Up shot of the lead singer.
4 2 Static Medium shot of the lead singer.
5 1 Static Medium shot of the right side of the performance area during the
first half of the song, and a Static Wide shot of the entire performance
area, during the second half.
6 1 Hand-Held camcorder operation. This is a roving camera position.
Various 10-second shots from anywhere within the outlined area. Get at
least 3 Cutaway shots for each performer.
7 1 Hand-Held camcorder operation, half of song. Another roving camera
position.Various 10-second Close-Up and Medium shots of the
drummer, including Cutaways. If a lively audience is present, an
impressive Wide shot could be taken from behind the drummer.
Here are 2 more map examples. I’ll give you the band layout, camera positions,
and Take numbers, and let you figure out the shots: