Specifications
Table Of Contents
- Setting up the Screen
- Screen Size and Projection Distance
- Changing the Lens
- Connecting Pin Assignments
- RS-232C Specifications and Commands
- Setting up the Projector Network Environment
- Controlling the Projector via LAN
- Controlling the Projector Using Internet Explorer (Version 5.0 or later)
- Confirming the Projector Status (Status)
- Controlling the Projector (Control)
- Setting and Adjusting the Projector (Settings & Adjustments)
- Setting the Security (Network – Security)
- Making General Settings for the Network (Network - General)
- Setting for Sending E-mail when an Error Occurs (Mail – Originator Settings)
- Setting Error Items and Destination Addresses to which E-mail is to be Sent when an Error Occurs (Mail – Recipient Settings)
- Setting Error Items and the URL that are to be Displayed when an Error Occurs (Service & Support – Access URL)
- Setting up the Projector Using RS-232C or Telnet
- When Connecting Using RS-232C
- When Connecting Using Telnet
- SETUP MENU (Main Menu)
- ADVANCED SETUP MENU
- View Setting Detail List ([V]View All Setting)
- Set Items
- Save Settings and Quit ([S]Save & Quit)
- Quit without Saving Settings ([Q]Quit Unchanged)
- IP Address Setting ([1]IP Address)
- Subnet Mask Setting ([2]Subnet Mask)
- Default Gateway Setting ([3]Default Gateway)
- User Name Setting ([4]User Name)
- Password Setting ([5]Password)
- RS-232C Baud Rate Setting ([6]RS-232C Baud Rate)
- Projector Name Setting ([7]Projector Name)
- DHCP Client Setting ([8]DHCP Client)
- Disconnecting All Connections ([D]Disconnect All)
- Entering ADVANCED SETUP MENU ([A]Advanced Setup)
- Setting Auto Logout Time (ADVANCED[1]Auto Logout Time)
- Data Port Setting (ADVANCED[2]Data Port)
- Carrying out Network Ping Test (ADVANCED[5]Network Ping Test)
- Setting of Accept IP Address (ADVANCED[6]Accept IP Addr(1) - [8]Accept IP Addr(3))
- Accepting All IP Addresses (ADVANCED[9]Accept All IP Addr)
- Setting of Search Port (ADVANCED[0]Search Port)
- Return to Default Settings (ADVANCED[!]Restore Default Setting)
- Return to Main Menu (ADVANCED[Q]Return to Main Menu)
- Resetting the Lamp Timer of the Projector via LAN
- Troubleshooting
- Dimensions
-17
RS-232C Specifications and Commands
CONTROL CONTENTS
Power ON
Standby mode
(or 40-second startup time)
COMMAND PARAMETER
RETURN
Internal Speaker : Off
Internal Speaker : On
Audio Out : FAO
Audio Out : VAO
PRJ Mode : Reverse Off
PRJ Mode : Reverse On
PRJ Mode : Invert Off
PRJ Mode : Invert On
Fan Mode : Normal
Fan Mode : High
Monitor Out : Disable
Monitor Out : Enable
Language Selection : ENGLISH
Language Selection : DEUTSCH
Language Selection : ESPAÑOL
Language Selection : NEDERLANDS
Language Selection : FRANÇAIS
Language Selection : ITALIANO
Language Selection : SVENSKA
Language Selection :
Language Selection : PORTUGUÊS
Language Selection :
Language Selection :
Language Selection :
Language Selection :
Language Selection : polski
Language Selection : Türkçe
Lamp Timer Reset *5
ASPK___0
ASPK___1
AOUT___1
AOUT___2
IMRE___0
IMRE___1
IMIN___0
IMIN___1
HLMD___0
HLMD___1
MOUT _ _ _ 0
MOUT _ _ _ 1
ME LA_ __1
ME LA_ __2
ME LA_ __3
ME LA_ __4
ME LA_ __5
ME LA_ __6
ME LA_ __7
ME LA_ __8
ME LA_ __9
ME LA_ _10
ME LA_ _11
ME LA_ _12
ME LA_ _13
ME LA_ _14
ME LA_ _15
LPRE0001
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
ERR OK or ERR
*5 Lamp Timer Reset command is available only in standby mode.
PJLink
TM
Compliant:
This product conforms with the PJLink standard Class 1 and all Class 1 commands are implemented.
This product confirms with the PJLink standard specification version 1.00.
For additional information, visit “http://pjlink.jbmia.or.jp/english/”.