Specifications
Table Of Contents
- Setting up the Screen
- Screen Size and Projection Distance
- Changing the Lens
- Connecting Pin Assignments
- RS-232C Specifications and Commands
- Setting up the Projector Network Environment
- Controlling the Projector via LAN
- Controlling the Projector Using Internet Explorer (Version 5.0 or later)
- Confirming the Projector Status (Status)
- Controlling the Projector (Control)
- Setting and Adjusting the Projector (Settings & Adjustments)
- Setting the Security (Network – Security)
- Making General Settings for the Network (Network - General)
- Setting for Sending E-mail when an Error Occurs (Mail – Originator Settings)
- Setting Error Items and Destination Addresses to which E-mail is to be Sent when an Error Occurs (Mail – Recipient Settings)
- Setting Error Items and the URL that are to be Displayed when an Error Occurs (Service & Support – Access URL)
- Setting up the Projector Using RS-232C or Telnet
- When Connecting Using RS-232C
- When Connecting Using Telnet
- SETUP MENU (Main Menu)
- ADVANCED SETUP MENU
- View Setting Detail List ([V]View All Setting)
- Set Items
- Save Settings and Quit ([S]Save & Quit)
- Quit without Saving Settings ([Q]Quit Unchanged)
- IP Address Setting ([1]IP Address)
- Subnet Mask Setting ([2]Subnet Mask)
- Default Gateway Setting ([3]Default Gateway)
- User Name Setting ([4]User Name)
- Password Setting ([5]Password)
- RS-232C Baud Rate Setting ([6]RS-232C Baud Rate)
- Projector Name Setting ([7]Projector Name)
- DHCP Client Setting ([8]DHCP Client)
- Disconnecting All Connections ([D]Disconnect All)
- Entering ADVANCED SETUP MENU ([A]Advanced Setup)
- Setting Auto Logout Time (ADVANCED[1]Auto Logout Time)
- Data Port Setting (ADVANCED[2]Data Port)
- Carrying out Network Ping Test (ADVANCED[5]Network Ping Test)
- Setting of Accept IP Address (ADVANCED[6]Accept IP Addr(1) - [8]Accept IP Addr(3))
- Accepting All IP Addresses (ADVANCED[9]Accept All IP Addr)
- Setting of Search Port (ADVANCED[0]Search Port)
- Return to Default Settings (ADVANCED[!]Restore Default Setting)
- Return to Main Menu (ADVANCED[Q]Return to Main Menu)
- Resetting the Lamp Timer of the Projector via LAN
- Troubleshooting
- Dimensions
-14
RS-232C Specifications and Commands
Commands
Example: When turning on the projector, make the following setting.
→
←
POWR _ 1__
OK
ProjectorComputer
CONTROL CONTENTS
Power ON
Standby mode
(or 40-second startup time)
COMMAND PARAMETER
RETURN
Power Off
Power On
Power Status
Projector Condition
Lamp Status
Lamp Power Status
Lamp Quantity
Lamp Usage Time (Hour)
Lamp Usage Time (Minute)
Lamp Life (Percentage)
Model Name Check
Model Name Check
Serial No. Check *1
Projector Name Setting 1 (First four characters) *2
Projector Name Setting 2 (Middle four characters) *2
Projector Name Setting 3 (Last four characters) *2
Projector Name Check
COMPUTER 1 (RGB1)
COMPUTER 2 (RGB2)
DVI (RGB3)
INPUT RGB Check
S-VIDEO (Video1)
VIDEO (Video2)
INPUT Video Check
INPUT Mode Check
INPUT Check
All Reset
Volume (0 - 60)
Volume up / down (– 10 - + 10)
Keystone (– 127 - + 127)
AV Mute Off
AV Mute On
Freeze Off
Freeze On
Eco+Quiet Mode : Off
Eco+Quiet Mode : On
Auto Sync Start
COMPUTER 1 Resize : Normal
COMPUTER 1 Resize : Stretch
COMPUTER 1 Resize : Dot By Dot
COMPUTER 1 Resize : Full
COMPUTER 1 Resize : Border
COMPUTER 2 Resize : Normal
COMPUTER 2 Resize : Stretch
COMPUTER 2 Resize : Dot By Dot
COMPUTER 2 Resize : Full
COMPUTER 2 Resize : Border
DVI Resize : Normal
DVI Resize : Stretch
DVI Resize : Dot By Dot
DVI Resize : Full
DVI Resize : Border
POWR_ __0
POWR_ __1
POWR? ???
TABN___1
TLPS___1
TPOW___1
TLPN___1
TLTT___1
TLTM___1
TLTL___1
TNAM___1
MNRD_ _ _ 1
SNRD___1
PJN1****
PJN2****
PJN3****
PJN0___1
IRGB___1
IRGB___2
IRGB___3
IRGB????
IVED___1
IVED___2
IVED????
IMOD????
ICHK????
ALRE___1
VOLA__**
VOUD_***
KEYS_***
IMBK___0
IMBK___1
FREZ___0
FREZ___1
THMD___0
THMD___1
ADJS___1
RASR_ __1
RASR_ __2
RASR_ __3
RASR_ __5
RASR_ __6
RBSR_ __1
RBSR_ __2
RBSR_ __3
RBSR_ __5
RBSR_ __6
RCSR_ __1
RCSR_ __2
RCSR_ __3
RCSR_ __5
RCSR_ __6
OK or ERR OK
OK OK or ERR
1 0
0:Normal 0:Normal
1:Temp High 1:Temp High
8:Lamp Life 5% or less 2:Fan Error
16:Lamp Burnt-out 4:Cover Open
32:Lamp Ignition Failure 8:Lamp Life 5% or less
16:Lamp Burnt-out
32:Lamp Ignition Failure
64:Temp Abnormally High
0:Off, 1:On, 2:Retry, 3:Waiting, 4:Lamp Error 0:Off, 4:Lamp Error
1:On, 2:Cooling 0:Standby
1
0 - 9999 (Integer)
0, 15, 30, 45
0% - 100% (Integer)
XGC465X / XGC435X
XG-C465X / XG-C435X
Serial No.
OK or ERR
OK or ERR
OK or ERR
Projector Name
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
1:RGB1(COMPUTER1), 2:RGB2(COMPUTER2), ERR
3:RGB3(DVI) or ERR
OK or ERR ERR
OK or ERR ERR
1:S-Video, 2:Video or ERR ERR
1:RGB, 2:Video ERR
1:COMPUTER1, 2:COMPUTER2, 3:DVI, ERR
4:S-Video, 5:Video
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR
OK or ERR ERR