AL-1633/1644 Operation-Manual Online-Manual GB
Table Of Contents
- Introduction
- How to Use the Online Manual
- Contents
- Basic Printing
- Opening the Printer Driver From the "Start" Button
- Printer Driver Settings
- Printing Multiple Pages on One Page
- Fitting the Printed Image to the Paper
- Printing a Watermark
- Outline of the Print Status Window
- Sharing the Printer Using Windows Networking
- Shared Printer Settings
- Client Settings
- Scanning Overview
- Scanning from a TWAIN-Compliant Application
- Scanning from a WIA-Compliant Application (Windows XP)
- Scanning from the "Scanner and Camera Wizard" (Windows XP)
- Outline of Button Manager
- Button Manager Settings
- Index
3
SCAN
23
CONTENTS INDEX
Scanning from a TWAIN-Compliant Application
(part 4)
Scanner Driver Settings
The scanner driver setup screen consists of the "Set-up screen", which lets you select scan settings, and the "Preview screen",
which shows the scanned image. For details on the scan settings, click the "Help" button in the preview screen to display Help.
Set-up screen
"Scanning Source" menu
Select the location where the original
is placed. Selections are "Platen"
(document glass) or "SPF (Simplex)".
☞
Scanning from a TWAIN-Compliant
Application
"Scanning Mode" menu
Select "Standard" or "Professional" for
the scanning mode. For details on the
settings, click the "Help" button in the
preview screen to display Help.
"Zoom Preview" Checkbox
When this is selected, the selected part
of the preview image will be enlarged
when the "Preview" button is clicked.
To return to the regular view, remove
the checkmark.
"Preview" button
Previews the document.
"Scanning" button
Click to scan an original using the
selected settings. Before clicking the
"Scanning" button, make sure the
settings are correct.
"Close" button
Click to close the scanner driver setup
screen.
1
2
3
4
5
6
On machines without an SPF,
this setting is fixed at "Platen".
"Zoom Preview" cannot be used
when "SPF (Simplex)" is selected
in the "Scanning Source" menu.
1
Note
2
3
Note
If "Preview" is cancelled by
immediately pressing the [Esc]
key on your keyboard, or the
[CLEAR] key ( ) or [CLEAR
ALL] key ( ) on the machine,
nothing will appear in the
preview screen.
To cancel a scanning job after
clicking the "Scanning" button,
press the [Esc] key on your
keyboard, or the [CLEAR] key
( ) or [CLEAR ALL] key ( ) on
the machine.
4
Note
5
Note
6