AL-1633/1644 Operation-Manual Online-Manual GB
Table Of Contents
- Introduction
- How to Use the Online Manual
- Contents
- Basic Printing
- Opening the Printer Driver From the "Start" Button
- Printer Driver Settings
- Printing Multiple Pages on One Page
- Fitting the Printed Image to the Paper
- Printing a Watermark
- Outline of the Print Status Window
- Sharing the Printer Using Windows Networking
- Shared Printer Settings
- Client Settings
- Scanning Overview
- Scanning from a TWAIN-Compliant Application
- Scanning from a WIA-Compliant Application (Windows XP)
- Scanning from the "Scanner and Camera Wizard" (Windows XP)
- Outline of Button Manager
- Button Manager Settings
- Index
3
SCAN
22
CONTENTS INDEX
Scanning from a TWAIN-Compliant Application
(part 3)
7
Specify the scanning area and set the scan
preferences.
For information on specifying the scan area and setting
the scan preferences, see scanner driver Help.
☞
Scanner Driver Settings
8
When you are ready to begin scanning, click the
"Scanning" button.
To cancel a scanning job after clicking the "Scanning"
button, press the [Esc] key on your keyboard.
When you close the scanner driver after scanning, the
image data will appear as a new file in Sharpdesk, as
shown below.
●
Scanning a large area in full colour at high resolution
results in a large quantity of data and a prolonged
scanning time. It is recommended that you set the
scanning preferences according to the type of the
original being scanned, i.e., Monitor, Photo, FAX, or
OCR.
●
The scan resolution will vary depending on the
scanning area and colour mode (Full colour,
Greyscale, or Black & White). For example, if an A4
original is scanned in full colour at 300 dpi, the
machine will scan the original in full colour at 150 dpi
and the scanner driver will enhance the resolution to
300 dpi.
Caution