AL-1633/1644 Operation-Manual Online-Manual GB
Table Of Contents
- Introduction
- How to Use the Online Manual
- Contents
- Basic Printing
- Opening the Printer Driver From the "Start" Button
- Printer Driver Settings
- Printing Multiple Pages on One Page
- Fitting the Printed Image to the Paper
- Printing a Watermark
- Outline of the Print Status Window
- Sharing the Printer Using Windows Networking
- Shared Printer Settings
- Client Settings
- Scanning Overview
- Scanning from a TWAIN-Compliant Application
- Scanning from a WIA-Compliant Application (Windows XP)
- Scanning from the "Scanner and Camera Wizard" (Windows XP)
- Outline of Button Manager
- Button Manager Settings
- Index
2
PRINTER SHARING
18
CONTENTS INDEX
Client Settings
(part 3)
Settings in Windows NT 4.0
If your operating system is Windows NT 4.0, establish settings as follows in the printer properties after installing the printer driver.
For the procedure for installing the printer driver, see "INSTALLING THE SOFTWARE" in the Software Setup Guide.
1
Click the "Start" button, select "Settings", and
then click "Printers".
2
Click the "SHARP AL-XXXX" printer driver icon
and select "Properties" from the "File" menu.
The printer properties will appear.
3
Click the "Ports" tab, and click the "Add Port"
button.
The
"
Printer Ports
"
dialog box will appear.
4
Select "Local Port" in the "Available Printer
Ports" list, and click the "New Port" button.
The
"
Port Name
"
dialog box will appear.
5
Enter "\\(name of server connected to
machine)\(name of shared printer)", and click
the "OK" button.
6
Click the "OK" button in the printer properties
window.
name of server connected to machine
name of shared printer