User Manual

4040
4040
40
STÖRUNGEN
5
Fehlersuche
Probleme mit der Kopier- und DruckqualitätProbleme mit der Kopier- und Druckqualität
Probleme mit der Kopier- und DruckqualitätProbleme mit der Kopier- und Druckqualität
Probleme mit der Kopier- und Druckqualität
In der nachfolgenden Tabelle sind nur einige mögliche Ursachen aufgeführt. Unter
den tatsächlichen Betriebsbedingungen können weitere Störungsursachen
auftreten. Wenden Sie sich an Ihren SHARP-Kundendienst, falls ein Problem
entsteht, das anscheinend nicht unter die in der Tabelle aufgelisteten Fälle
eingeordnet werden kann, oder falls Ihnen ein Aspekt des Kopier- oder
Druckvorgangs merkwürdig erscheint.
ProblemProblem
ProblemProblem
Problem
Unregelmäßiger Druck
oder blasse Stellen.
Der Kopierer liefert
unbedruckte Seiten.
Schwarze Flecken.
Weiße Flecken in
einzelnen
Zeichen.
Mögliche UrsacheMögliche Ursache
Mögliche UrsacheMögliche Ursache
Mögliche Ursache
Falsche Papierqualität.
Ungleichmäßige Verteilung des
Toners.
Die Entwicklereinheit ist nicht
richtig installiert.
Falsche Papierqualität.
Es wurde eine Entwicklereinheit
aus einem anderen SHARP-
Kopierer installiert.
Das Kopierpapier ist zu
trocken.
Das Kopierpapier ist zu feucht.
Kopieren oder Drucken auf
unebener Oberfläche.
LösungLösung
LösungLösung
Lösung
Nur Papier verwenden, das die für
den Kopierer erforderlichen
Spezifikationen aufweist.
S.128
Die Entwicklereinheit entnehmen
und vorsichtig schütteln, um den Toner
gleichmäßig zu verteilen. Entwick-
lereinheit wieder einsetzen.
S. 30
Richtige Installation der Entwickler-
einheit überprüfen.
S. 30
Nur Papier verwenden, das die für
den Kopierer erforderlichen
Spezifikationen aufweist.
S.128
Für den selben Kopierer stets die
selbe Entwicklereinheit verwenden.
Die Verwendung einer Entwickler-
einheit, die bereits in einem anderen
Kopierer in Gebrauch war, führt
nicht zum gewünschten Ergebnis.
Den Druck- oder Kopiervorgang
mit Papier aus einer anderen
Lieferung wiederholen.
Darauf achten, daß
Entwicklereinheit und
Trommerleinheit richtig installiert
sind, siehe S.29, 31
Thank you very much for buying a SHARP laser printer. This manual
tells you how to set up, operate and maintain your new printer,
and contains advice on how to get the best performance from the printer.
The descriptions contained in this manual assume that you are familiar
with the operation of your computer and with how to send files to be printed.
Please use this manual along with the documentation for your computer
hardware and software.
Your new printer has been specially designed to give you high-quality,
trouble-free printing performance. The printer driver software lets the printer
communicate with your computer via an IEEE P1284 bidirectional parallel
interface, so you can control all aspects of printing from the Windows Printer
control panel on your computer screen. Printing speed is a maximum
4 pages per minute at resolutions of 300 x 300 dpi for
the JX-9200 and 600 x 600 dpi for the JX-9210.
Consideration has also been given to ecological and environmental factors.
Your printer features low power consumption, and after printing is
completed it switches to a standby mode which complies with
the US EPA Energy Star program. Moreover, no harmful ozone is
produced during printing, and the toner self-recycling technology
ensures that no toner is wasted. Printer operation is also very
quiet: the printer generates less than 45 dBA of acoustic noise
during printing, and during standby mode the noise level is no
higher than the background noise level.
Despite being packed with so many features, the printer is very compact.
Its footprint is no larger than a single A4 page, and the total weight is
approximately 5 kg, meaning that it is easy to transport and set up. The
100-sheet multipurpose tray is also located at the top of the printer to
save space and to make inserting the paper easy.
Most software applications will let you adjust the margins to have around
the edges of the paper that you will be printing on. The area inside the
margins then becomes the "printable area". The Windows Printer Driver
specifies the minimum values that you can set for these page margins.
These minimum margin settings vary depending on whether you are
printing from a Windows application or from a non-Windows application
in PCL emulation mode.
The following illustration and tables show the minimum settings that can
be made in your software applications in both Windows and PCL modes.
Thank you very much for buying a SHARP laser printer. This manual
tells you how to set up, operate and maintain your new printer,
and contains advice on how to get the best performance from the printer.
The descriptions contained in this manual assume that you are familiar
with the operation of your computer and with how to send files to be printed.
Please use this manual along with the documentation for your computer
hardware and software.
Your new printer has been specially designed to give you high-quality,
trouble-free printing performance. The printer driver software lets the printer
communicate with your computer via an IEEE P1284 bidirectional parallel
interface, so you can control all aspects of printing from the Windows Printer
control panel on your computer screen. Printing speed is a maximum
4 pages per minute at resolutions of 300 x 300 dpi for
the JX-9200 and 600 x 600 dpi for the JX-9210.
Consideration has also been given to ecological and environmental factors.
Your printer features low power consumption, and after printing is
completed it switches to a standby mode which complies with
the US EPA Energy Star program. Moreover, no harmful ozone is
produced during printing, and the toner self-recycling technology
ensures that no toner is wasted. Printer operation is also very
quiet: the printer generates less than 45 dBA of acoustic noise
during printing, and during standby mode the noise level is no
higher than the background noise level.
Despite being packed with so many features, the printer is very compact.
Its footprint is no larger than a single A4 page, and the total weight is
approximately 5 kg, meaning that it is easy to transport and set up. The
100-sheet multipurpose tray is also located at the top of the printer to
save space and to make inserting the paper easy.
Most software applications will let you adjust the margins to have around
the edges of the paper that you will be printing on. The area inside the
margins then becomes the "printable area". The Windows Printer Driver
specifies the minimum values that you can set for these page margins.
These minimum margin settings vary depending on whether you are
printing from a Windows application or from a non-Windows application
in PCL emulation mode.
The following illustration and tables show the minimum settings that can
be made in your software applications in both Windows and PCL modes.
Entlang einer Kante ist
kein Bild vorhanden.
Entwicklerinheit oder
Trommeleinheit ist nicht richtig
installiert.
Den Druck- oder Kopiervorgang mit
Papier aus einer anderen Lieferung
wiederholen. Die Verpackung erst
öffnen, wenn das Kopierpapier
benötigt wird, damit es nicht zu viel
Feuchtigkeit aus der Luft aufnimmt.
S. 128
Beim Bedrucken von Umschlägen
das Layout ändern. Nicht auf
Stellen drucken, an denen sich auf
der Rückseite des Umschlags
überlappende Nahtstellen befinden.
Verschmierter
Hintergrund.
Ungeeignete Betriebs-
bedingungen (Temperatur,
Luftfeuchtigkeit).
Kopierer unter geeigneten Umge-
bungsbedingungen gemäß Seite
4
einsetzen.
GR 05 MACHINE TROUBLE LEO.p65 20/03/00, 16:0740