User Manual

HOW TO USE THE FAX FUNCTION
7272
7272
72
8
ReRe
ReRe
Re
verver
verver
ver
se Sendingse Sending
se Sendingse Sending
se Sending
The SPF on this machine scans the original from the last page. For the machine
to send the originals starting from the first page, Reverse Sending is initially
set to “ON”. This function works only when the original is sent from memory.
Note:Note:
Note:Note:
Note: In Reverse Sending mode, when you send a large number of originals
and the memory becomes full, the originals already stored will be
cancelled. In this kind of situation, it is recommended you send the
original directly.
Use the procedure below to turn the Reverse Sending function on or off.
Factory setting: 1 (ON)
StepStep
StepStep
Step
Press these kePress these ke
Press these kePress these ke
Press these ke
ysys
ysys
ys
CommentsComments
CommentsComments
Comments
11
11
1 “OPTION SETTING” will
appear in the display.
22
22
2 “REVERSE SENDING”
will appear in the display.
33
33
3 Press
11
11
1 to turn the
function on, or
22
22
2 to turn it
off.
44
44
4 Press the
STST
STST
ST
OPOP
OPOP
OP key twice
to exit.
Note:Note:
Note:Note:
Note: If you are adding to a group of previously scanned originals (for example
for memory polling), keep the Reverse Sending setting the same as it
was for the previously scanned originals. If you change the setting, the
sending order of the originals will change during the transmission.
(According to the setting in effect for each scan.)
oror
oror
or
Sending Originals
FUNCTION
GHI
ABC
ABC
STOP
STOP
SUK 08 USING FAX LEO.p65 17/04/00, 13:4672