Service manual

AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 23
(3) Scan plate removal
1) Remove the scan plate.
(4) PS roller removal
1) Remove the PS roller.
K. Upper transport roller
(1) Parts removal
1) Remove the gear.
2) Remove the upper transport release arm.
3) Remove the bearing.
4) Remove the E-ring.
5) Remove the bearing.
■ Note for reassembly
Use care so that the rib on the upper transport release arm catches
the guide.
(2) Upper transport roller removal
1) Remove the upper transport roller.
L. Paper sensor
1) Disconnect one connector.
2) Remove the paper sensor.
M. Lower transport roller
(1) Reverse self-weight gate removal
1) Remove the reverse self-weight gate.
1
1
1
2
3
5
4
1
2
1
1