Service manual

AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 17
2) Disconnect the connector.
3) Remove two screws, and remove the scanner motor.
4) Remove two screws and one harness, and remove the main
motor.
5) Remove two screws and one connector, and remove the
exhaust fan motor.
6) Disconnect the connector.
7) Remove the two screws, and remove the NIC PWB.
(AL-2040CS/2050CS only)
8) Disconnect the connector.
9) Remove the three screws, and remove the NIC PWB unit.
(AL-2040CS/2050CS only)
10) Disconnect the connectors.
11) Remove the five screws, and remove the MCU PWB. (The
shape of the MCU PWB differs depending on the model.)
C. Assembly procedure
For assembly, reverse the disassembly procedure.
1)
2)
3)
1)
2)
3)
1)
2)
3)
Blowing direction
2)
2)
3)
1)
3)
3)
1)
2)
2)
2)
3)
2)
2)
2)
1)
1)
1)
1)
1)
1)