Service manual

AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 9
7) Remove the PWB insulation mylar and remove the paper trans-
port detection sensor (POD).
8) Remove two springs and open the intermediate frame unit.
(AL-2030/2040CS only)
9) Remove the screw, and open the upper paper guide.
(AL-2050CS only)
10) Remove the roller, and remove the belt. (AL-2050CS only)
2)
1)
1)
2)
1)
1)
2)
1)
2)