Service manual

AL-2030/2040CS/2050CS UNPACKING AND INSTALLATION 5 - 3
7. Loading paper
1) Raise the handle of the paper tray and pull the paper tray out
until it stops.
2) Remove the pressure plate lock. Rotate the pressure plate lock
in the direction of the arrow to remove it while pressing down
the pressure plate of the paper tray.
3) Store the pressure plate lock which has been removed in step
2). To store the pressure plate lock, rotate the lock to fix it on the
relevant location.
4) Adjust the paper guides on the paper tray to the copy paper
width and length. Squeeze the lever of paper guide (A) and
slide the guide to match with the width of the paper. Move paper
guide (B) to the appropriate slot as marked on the tray.
5) Fan the paper and insert it into the tray. Make sure the edges go
under the corner hooks.
Note: Do not load paper above the maximum height line ( ).
Exceeding the line will cause a paper misfeed.
6) Gently push the paper tray back into the unit.
8. Power to copier
Ensure that the power switch of the unit is in the OFF position. Plug
the other end of the power cord into the nearest outlet. Turn the
power switch on the left side of the unit to the "ON" position. The
start ( ) indicator will light up and other indicators which show the
initial settings of the operation panel will also light up to indicate the
ready condition.
9. Software
The CD-ROM that accompanies the machine contains the following
software:
Printer driver (AL-2030)
The printer driver enables you to use the printer function of the
machine.
The printer driver includes the Print Status Window. This is a utility
that monitors the machine and informs you of the printing status,
the name of the document currently being printed, and error mes-
sages.
Please note that the printing over a network connection is not possi-
ble.
MFP driver (AL-2040CS/2050CS)
Printer driver
The printer driver enables you to use the printer function of the
machine.
The printer driver includes the Print Status Window. This is a utility
that monitors the machine and informs you of the printing status,
the name of the document currently being printed, and error mes-
sages.
Please note that the Print Status Window does not operate when
the machine is used as a network printer.
Scanner driver*
The scanner driver allows you to use the scanning function of the
machine with TWAIN-compliant and WIA-compliant applications.
Sharpdesk* (AL-2040CS/2050CS)
Sharpdesk is an integrated software environment that makes it
easy to manage documents and image files, and launch applica-
tions.
Button Manager* (AL-2040CS/2050CS)
Button Manager allows you to use the scanner menus on the
machine to scan a document.
*: The scanning feature can only be used with computers that are
connected to the machine by a USB cable. If you are connected
to the machine by a LAN connection, only the printer function can
be used.
A. Before installation
Hardware and software requirements
Check the following hardware and software requirements in order to
install the software.
Pressure plate lock
Paper guide (B)
Paper guide (A)
Computer
type
IBM PC/AT or compatible computer equipped
with a USB 2.0*
1
/1.1*
2
or 10Base-T LAN interface
Operating
system*
3
*
4
Windows 98, Windows Me, Windows 2000
Professional*
5
, Windows XP*
5
, Windows Vista*
5
Display 800 x 600 dots (SVGA) display with 256 colors
(or better) (AL-2030/2040CS)
1024 x 768 dots resolution and 16-bit color or
higher is recommended. (AL-2050CS)
Hard disk
free space
150 MB or more
Other
hardware
requirements
An environment on which any of the operating
systems listed above can fully operate