Specifications
Table Of Contents
- Introduction
- How to Use the Online Manual
- Contents
- Basic Printing
- Opening the Printer Driver From the "Start" Button
- Printer Driver Settings
- Printing Multiple Pages on One Page
- Fitting the Printed Image to the Paper
- Two-sided Printing
- Rotating the Print Image 180 Degrees
- Printing a Watermark
- Outline of the Print Status Window
- Scanning Overview
- Scanning from a TWAIN-Compliant Application
- Scanning from a WIA-Compliant Application (Windows XP)
- Scanning from the "Scanner and Camera Wizard" (Windows XP)
- Outline of Button Manager
- Button Manager Settings
- Troubleshooting
- If a Notice Page is printed
- Printer Driver Features
- About the Web Page
- Configuration via the Web Page
- Index
2
SCAN
21
CONTENTS INDEX
Scanning from a WIA-Compliant Application (Windows XP)
(part 1)
If you are using Windows XP, you can use the WIA driver to scan from Sharpdesk, Paint and other WIA-compliant applications. The
procedure for scanning using Paint is explained in the following.
1
Place the original that you wish to scan on the
document glass/RSPF.
☞
For information on setting an original for scanning,
refer to "NORMAL COPYING" in the Operation
Manual.
2
Start Paint and then click the "File" menu and
select "From Scanner or Camera".
The scan screen of the WIA driver will appear.
If you have WIA drivers for other devices installed in your
computer, the "Select Device" screen will open. Select
"SHARP AL-XXXXCS" and click the "OK" button.
Note