Specifications

AL-1551 OPERATIONAL DESCRIPTIONS 7-7
3) When pawl C of the manual paper feed clutch sleeve is engaged with
the manual feed latch, the manual feed stopper falls and the manual
take-up roller rises. At that time, the manual paper feed roller is
rotating.
4) The lead edge of the transported paper is pressed on the resist roller
by the transport roller. Then the paper is stopped temporarily to allow
synchronization with the lead edge of the image on the OPC drum.
From this point, the operation is the same as the paper feed
operation from the tray. (Refer to A-5 - 8.)
5) The solenoid turns off to close the gate and return to the initial state.
(3) Conditions of occurrence of paper misfeed
a. When the power is turned on:
PPD or POD is ON when the power is turned on.
b. Copy operation
ON
MPFS
A
C
a PPD1 jam PPD1 does not turn off within 4 sec after turning
on the resist roller.
b PPD2 jam PPD2 is off immediately after turning on the
resist roller.
PPD2 does not turn off within 1.2 sec after
turning off the resist roller.
c POD jam POD does not turn on within 2.9 sec after turning
on the resist roller.
POD does not turn off within 1.5 sec - 2.7 sec
after turning off PPD2.
OF
MPFS
F
A
C