User`s guide

CHAPTER 2 OPTIONS
2-7
☛
4
.
To install the memory board onto the main control board, use the supplied
spacer and plug the board into the upper left connector of the main control
board.
Fig. 2-4 Install the Memory Board
☛
5
.
Secure the access cover with the two screws.
☛
6.
Refit the rear cover.
☛
7
.
Reconnect the interface cable from your computer. Plug the power cord into
the AC outlet and turn on the power switch.
☛
8
.
To check that the memory board is installed correctly, you should perform a
Test Print “Print Configuration”. This listing will show the current total
memory size, so you can check that it was updated.